TPO roofing cost on five April 2026 public re-roof bids in Columbus, Georgia ran $11.76 to $18.93 per sq ft for 12,500 to 17,500 sq ft; roofs under 3,500 sq ft bid $28.64 to $44.05 in 2022.
Key takeaways
- Five bids for the TPO fleeceback re-roof of the Pop Austin Recreation Center came in at $11.76 to $18.93 per sq ft, median $15.50, on 12,500 to 17,500 sq ft (Columbus Consolidated Government, RFB 26-0033, April 30, 2026).
- Small roofs cost more per sq ft: two bids on about 3,100 sq ft at Edgewood Senior Center equal $28.64 and $44.05 per sq ft (Columbus RFB 23-0007, September 2022), and a 6,396 sq ft TPO replacement for the Federal Aviation Administration in Memphis was awarded at $37.33 per sq ft (USAspending.gov, award 697DCK24C00172, March 2024).
- Insulation outweighs the membrane on a tear-off: at the median unit prices in Tulsa’s 2023 roofing contract, three 1.5-inch polyiso layers plus a 1/2-inch cover board sum to $6.83 per sq ft, 61.8% of an $11.05 layer sum, while 60-mil fully adhered TPO was $3.25 (City of Tulsa, TAC 1015B and 1015C, 2023).
- Washington State University accepted a mechanically fastened 115-mil TPO fleeceback overlay of 32,200 sq ft for $284,000, or $8.82 per sq ft, 33.8% of the lowest full replacement bid (WSU bid results, March 2023).
- ASTM D6878-13 requires at least 30% of nominal thickness over the scrim: 18 mils on a 60-mil sheet and 24 mils on an 80-mil sheet (NRCA Professional Roofing, August 2017).
- The BLS Producer Price Index for nonresidential roofing contractors averaged 59.8% higher in 2025 than in 2019, and the preliminary September 2026 reading is 5.7% above September 2025 (BLS series PCU23816X23816X).
How much does a TPO roof cost per square foot?
Public bids with a stated roof area put a commercial TPO re-roof at $11.76 to $18.93 per sq ft for 12,500 to 17,500 sq ft in April 2026, which is $1,176 to $1,893 per 100 sq ft roofing square. Smaller and federal jobs bid higher: $28.64 to $44.05 per sq ft under 3,500 sq ft in 2022, and $37.33 on a 6,396 sq ft Federal Aviation Administration job in 2024.
Each row below divides a base bid by the roof area printed on the same public record. A base bid includes flashings, edge metal, drains, mobilization and bonds that a membrane-only unit price leaves out, so it sits well above the $3 to $8 ranges that consumer cost guides quote. The last price column moves each figure to September 2026 with the BLS Producer Price Index for nonresidential roofing contractors (series PCU23816X23816X).
| Project, place | Bid or award date | Roof area (sq ft) | TPO scope on the record | Base bid or award | $ per sq ft | Sep 2026 $ per sq ft (PPI) | Source |
|---|---|---|---|---|---|---|---|
| Pop Austin Recreation Center, Columbus, GA | Apr 30, 2026 | 12,500 to 17,500 (5 bids) | TPO fleeceback; Carlisle named in 3 of 5 bids | $160,918 to $247,736 | $11.76 to $18.93 (median $15.50) | $12.04 to $19.38 | Columbus RFB 26-0033 |
| Metra Lower Maintenance Shop, Columbus, GA | Jul 6, 2022 | 9,100 to 10,400 (4 bids) | TPO; Carlisle or Johns Manville; base also extends metal wall panels | $284,700 to $388,523 | $31.29 to $37.96 (median $35.26) | $39.57 to $48.01 | Columbus RFB 22-0041 |
| Edgewood Senior Center, Columbus, GA | Sep 28, 2022 | 3,025 and 3,200 (2 bids) | TPO roof system | $91,644.50 to $133,255 | $28.64 to $44.05 (median $36.35) | $36.10 to $55.53 | Columbus RFB 23-0007 |
| Federal Aviation Administration, Memphis, TN | Mar 26, 2024 | 6,396 | Remove existing TPO system, replace roof; 14 offers | $238,735 award | $37.33 | $41.86 | USAspending 697DCK24C00172 |
| Food Service Building, Washington State University, Pullman, WA | Mar 20, 2023 | 32,200 | Recover: 115-mil TPO fleeceback, mechanically fastened over modified bitumen | $284,000 award | $8.82 | $10.29 | WSU bid results |
The Columbus tabulation prints the measured area next to each base bid, which is what makes a per-sq-ft figure possible. Bidders measured the same Pop Austin roof at 12,500 to 17,500 sq ft, a 40% spread, so check the area before comparing two quotes. Our guide on leveling bids explains how to compare construction bids.

For a whole-building budget rather than a roof line, use our figures on commercial construction cost per square foot.
What do federal TPO awards specify?
Federal TPO awards on USAspending.gov state the membrane, attachment and insulation target more often than the roof area. Three awards from 2025 and 2026 show the spread: 60-mil mechanically fastened over a high-density cover board to R-30 for U.S. Customs and Border Protection, 72-mil fully adhered with R-38 at Fort Bliss, and 135-mil fleeceback at Fort Sill.
| Agency, place | Performance start | Award | Membrane and attachment | Insulation and board | Source |
|---|---|---|---|---|---|
| U.S. Customs and Border Protection, McAllen, TX | Oct 1, 2026 | $1,362,155.82 | 60-mil TPO, mechanically fastened | High-density cover board; minimum R-30 assembly | USAspending 70B01C26C00000113 |
| U.S. Army, Fort Bliss, TX (Bldg 2416) | Sep 15, 2025 | $466,400 | 72-mil TPO, fully adhered | R-38 insulation; 5/8-inch glass-mat roof board | USAspending W911SG25CA044 |
| U.S. Army, Fort Sill, OK (Bldg 2025) | Aug 26, 2025 | $2,197,859 | 135-mil fleeceback TPO, with clay barrel tile repair | Not stated in the award text | USAspending W912BV25FA033 |
None of these three award records states a roof area, so they serve as specification benchmarks, not prices per sq ft. A private owner sets the same three items in the bid documents: membrane thickness, attachment method and the R-value or U-factor the energy code requires.
How much of a TPO roof’s cost is insulation and cover board?
On a tear-off, insulation and cover board usually cost more than the TPO sheet. In the City of Tulsa’s 2023 roofing contract, three 1.5-inch polyiso layers at a median $1.86 each plus a $1.25 fiberboard cover board came to $6.83 per sq ft, 61.8% of an $11.05 layer total; the 60-mil fully adhered membrane was $3.25, or 29.4%.
| Line item (Tulsa specification) | Bid A, May 25, 2023 | Bid B, Jun 15, 2023 | Bid C, Jun 15, 2023 | Median | Source |
|---|---|---|---|---|---|
| Remove built-up or single-ply roofing to the deck, per sq ft | $0.97 | $0.97 | $1.25 | $0.97 | TAC 1015B, 1015C |
| Polyiso 1.5 in, LTTR R-9.0, mechanically fastened, per sq ft | $1.86 | $1.90 | $1.75 | $1.86 | Tulsa |
| High-density fiberboard 1/2 in, mechanically fastened, per sq ft | $1.25 | $1.27 | $1.10 | $1.25 | Tulsa |
| High-density fiberboard 1/2 in, set in hot asphalt, per sq ft | $1.39 | $1.41 | $1.25 | $1.39 | Tulsa |
| TPO 60 mil, reinforced, fully adhered, per sq ft | $3.25 | $3.27 | $3.00 | $3.25 | Tulsa |
| EPDM 60 mil, fully adhered, per sq ft | $4.17 | $4.19 | $3.75 | $4.17 | Tulsa |
| TPO 60 mil flashing membrane, per sq ft | $7.26 | $7.28 | $4.20 | $7.26 | Tulsa |
Three 1.5-inch boards rated LTTR R-9.0 each give R-27 by simple sum, and each added layer costs $1.75 to $1.90 per sq ft at Tulsa’s 2023 prices. Penn State’s February 2025 bid priced replacing damaged 2.6-inch polyiso at $2.50 to $10.00 per sq ft across four bidders, which shows how much higher small-quantity repair prices run than contract-scale ones.
The insulation target on a tear-off comes from the energy code your jurisdiction enforces. Our commercial energy code by state table shows which IECC or ASHRAE 90.1 edition applies where.
Does 45, 60 or 80 mil change the price?
Thickness changes only the membrane line, about 29% of a tear-off in Tulsa’s 2023 unit prices, so moving from 60 to 80 mil shifts the finished price far less than the sheet price. None of the 11 public bid and award records we compiled priced 60 and 80 mil side by side; the maker sheets show what each thickness buys instead.
| Product line | Nominal thickness | Thickness over scrim | Dynamic puncture, ASTM D5635 | Warranty or guarantee terms on the sheet | Source, date |
|---|---|---|---|---|---|
| Carlisle Sure-Weld | 45 mil | 0.018 in typical | Watertight at 12.5 J | Not on the data sheet | Carlisle TDS 08.11.14 (2014) |
| Carlisle Sure-Weld | 60 mil | 0.024 in typical | Watertight at 22.5 J | Not on the data sheet | Carlisle, 2014 |
| Carlisle Sure-Weld EXTRA | 80 mil | 0.034 in typical | Watertight at 30.0 J | Not on the data sheet | Carlisle, 2014 |
| Duro-Last Duro-TECH TPO60 | 60 mil | 30 mil (0.76 mm) | 50 J | 15, 20 or 25 years | Duro-Last PDS, Oct 14, 2024 |
| Duro-Last Duro-TECH TPO80 | 80 mil | 37 mil (0.94 mm) | 60 J | 15, 20 or 25 years | Duro-Last PDS, 2024 |
| Johns Manville JM TPO | 80 mil | 0.033 in | Pass at 25 J | Peak Advantage, 5 to 30 years | JM RS-8634 (2016) |
| ASTM D6878-13 minimum | 60 and 80 mil | 18 and 24 mils (30% of nominal) | No requirement | Not applicable | NRCA, Aug 2017 |
Puncture values come from each maker’s own test setup, so compare them within one maker’s sheet, not across brands. On Carlisle’s sheet, the 80-mil EXTRA stayed watertight at 30.0 J of impact against 22.5 J for 60 mil and 12.5 J for 45 mil.
What does ASTM D6878 require for thickness?
ASTM D6878 is the material standard for TPO sheet roofing. Since the 2013 edition it requires the coating over the reinforcing scrim on the weathering side to be at least 30% of nominal thickness: 18 mils on a 60-mil sheet and 24 mils on an 80-mil sheet, according to NRCA. Its physical property limits were set using 45-mil sheets.
Total sheet thickness has a tolerance too: JM’s 2016 sheet lists plus or minus 10% from nominal, and Carlisle’s 2014 sheet lists the D6878 limit as plus 15 or minus 10%. At the low limit, a 60-mil sheet can measure 54 mils (60 x 0.90). Ask each bidder to name the product line, submit the current data sheet and allow a membrane core cut at closeout if the specification calls for a thickness check.
Is 80 mil worth paying for?
On the maker sheets, 80 mil buys weathering layer and puncture resistance, not a longer warranty: Duro-Last lists the same 15, 20 and 25-year options for its 60 and 80-mil Duro-TECH sheets (October 2024). Duro-TECH TPO80 carries 37 mils over the scrim against 30 mils for TPO60, and its dynamic puncture rating rises from 50 J to 60 J.
The case for 80 mil therefore rests on traffic and impact. Roofs with rooftop units that technicians walk to, or roofs in hail country, are where those 7 extra mils over the scrim and the 10 J of extra puncture rating come into play.
Does the attachment method change TPO roofing cost?
Attachment sets how much fastening or adhesive goes under the sheet, but public bids rarely price it as its own line. In the records we compiled, fully adhered 60-mil TPO priced at $3.00 to $3.27 per sq ft in Tulsa’s 2023 contract, a mechanically fastened fleeceback recover cost $8.82 per sq ft in total at Washington State University, and federal awards specify both methods.
| Method | How the sheet is held | Public record that specified it | Price on the record | Source |
|---|---|---|---|---|
| Mechanically fastened | Screws and plates in the seam laps; the next sheet is welded over them | WSU 2023 recover (115-mil fleeceback, 32,200 sq ft); CBP McAllen 2026 (60-mil over high-density cover board) | $8.82 per sq ft complete recover (WSU); CBP $1,362,155.82, area not stated | WSU; USAspending |
| Fully adhered | Bonded to the cover board with adhesive across the whole sheet | Tulsa 2023 contract; Fort Bliss 2025 (72-mil, R-38) | $3.00 to $3.27 per sq ft for the membrane line (Tulsa); Fort Bliss $466,400, area not stated | Tulsa; USAspending |
| Induction welded | Plates fastened through the insulation, then heat-bonded to the underside of the sheet with an induction tool; no fasteners in the laps | None of the 11 records | No public price found | CB&C review of 11 records, Nov 2026 |
What moves the fastening price is the wind design at the roof edges. Tulsa’s polyiso line, for example, requires one fastener per 1.33 sq ft in the perimeter 8 feet and one per sq ft in the 8 ft by 8 ft corners, so a roof with more edge per sq ft uses more fasteners. Large distribution roofs, with little edge per sq ft, are covered in our warehouse construction guide.
Tear-off or recover: which applies and what does each cost?
A recover lays new TPO over the existing roof and skips removal and most insulation; a tear-off strips the roof to the deck. Washington State University’s 2023 bid shows the gap: a mechanically fastened 115-mil fleeceback overlay of 32,200 sq ft was accepted at $284,000, against $840,000 to $1,045,200 to remove and replace. The building code decides whether a recover is allowed.
- Count the existing coverings. Two or more applications of any roof covering bar a recover under IBC Section 1512.3, as printed in the 2025 California Building Code.
- Scan for moisture. A water-soaked or deteriorated roof also bars a recover; WSU required a thermal scan before construction, and Columbus priced wet-area removal and replacement at $3.50 to $25.00 per sq ft in April 2026.
- Check the covering type. Slate, clay, cement or asbestos-cement tile bars a recover under the same section.
- On a tear-off that removes insulation entirely above the deck, install new insulation that meets the new-construction R-value, per IECC Section C503.2.1 as read by Philadelphia’s Department of Licenses and Inspections (2021 code FAQ); the R-value may never drop.
- Where parapet heights and flashing limits, equipment curbs, window sills or door thresholds make thicker insulation technically infeasible, Philadelphia permits matching the existing R-value instead.
| Hidden condition found at tear-off | Unit price range | Bids | Date, place | Source |
|---|---|---|---|---|
| Wet roof material removal and replacement, per sq ft | $3.50 to $25.00 | 5 | Apr 2026, Columbus, GA | RFB 26-0033 |
| Steel deck replacement, same gauge and profile, per sq ft | $6.00 to $15.00 | 4 | Feb 2025, Penn State | Penn State OPP bid tab |
| Damaged 2.6 in polyiso replacement, per sq ft | $2.50 to $10.00 | 4 | Feb 2025, Penn State | Penn State |
| 3/4 in CDX plywood deck replacement, per sq ft | $4.00 to $8.00 | 4 | Feb 2025, Penn State | Penn State |
| Cementitious wood fiber deck replacement, per sq ft | $11.00 to $23.00 | 4 | Jul 2022, Columbus, GA | RFB 22-0041 |
| Wood blocking and nailers, per board foot | $2.00 to $12.00 | 5 | Apr 2026, Columbus, GA | RFB 26-0033 |
Unit prices like these cap the cost of surprises once the old roof is open, so ask for them on every bid form. If you are buying the building, the roof’s remaining life and immediate repair cost belong in the property condition assessment.
What does a worked TPO roof estimate look like?
A 20,000 sq ft tear-off with three 1.5-inch polyiso layers, a 1/2-inch cover board and 60-mil fully adhered TPO prices at $11.05 per sq ft from Tulsa’s 2023 contract medians, or $12.46 after escalation to September 2026 with the BLS roofing PPI. That is $249,200 before flashings, edge metal, drains and mobilization, which the April 2026 Columbus base bids include.
| Step | Input (source) | Arithmetic | $ per sq ft | 20,000 sq ft |
|---|---|---|---|---|
| 1. Tear-off to deck | Median of $0.97, $0.97, $1.25 (Tulsa 2023) | $0.97 | $0.97 | $19,400 |
| 2. Polyiso, three 1.5 in layers (R-27 by sum) | Median $1.86 per layer (Tulsa 2023) | 3 x $1.86 | $5.58 | $111,600 |
| 3. Cover board, 1/2 in high-density fiberboard, fastened | Median $1.25 (Tulsa 2023) | $1.25 | $1.25 | $25,000 |
| 4. 60-mil TPO, fully adhered | Median $3.25 (Tulsa 2023) | $3.25 | $3.25 | $65,000 |
| 5. Layer total, mid-2023 | Steps 1 to 4 | 0.97 + 5.58 + 1.25 + 3.25 | $11.05 | $221,000 |
| 6. Escalate to September 2026 | PPI 232.920 / 206.596 (Jun 2023) = 1.1274 (BLS) | $11.05 x 1.1274 | $12.46 | $249,200 |
| 7. Compare with a complete base bid | Pop Austin median $15.50 (Columbus, Apr 2026) | $15.50 minus $12.46 | $3.04 gap | $60,800 |
The $3.04 per sq ft gap in step 7 is not itemized on either record. It is where perimeter flashing ($4.20 to $7.28 per sq ft of flashing membrane in Tulsa’s contract), edge metal, drains, permits, bonds and mobilization sit. Ask each bidder to break those lines out in a schedule of values.
How have TPO roofing prices moved since 2019?
Commercial roofing prices rose fast through 2023 and more slowly since. The BLS Producer Price Index for nonresidential roofing contractors averaged 136.9 in 2019 and 218.815 in 2025, a 59.8% rise, and the preliminary September 2026 reading of 232.920 is 5.7% above September 2025. Use it to update any roofing bid older than a year.
| Year | Annual average index (Dec 2007 = 100) | Change from prior year | Source |
|---|---|---|---|
| 2019 | 136.9 | Not applicable | BLS PPI flat files |
| 2020 | 141.3 | +3.2% | BLS |
| 2021 | 149.817 | +6.0% | BLS |
| 2022 | 177.929 | +18.8% | BLS |
| 2023 | 204.403 | +14.9% | BLS |
| 2024 | 209.911 | +2.7% | BLS |
| 2025 | 218.815 | +4.2% | BLS |
The index tracks what nonresidential roofing contractors charge, not TPO sheet prices alone, and BLS marks June to September 2026 values as preliminary. For the cross-trade picture, see our commercial construction price index, and for import duties on building materials, our tracker of construction material tariffs.
Which TPO option fits your roof?
Pick the scope in this order: code first (recover or tear-off), then insulation on a tear-off, then thickness and attachment. The thresholds below come from IBC Section 1512.3, IECC Section C503.2.1 as read by Philadelphia, the maker data sheets and the public bids above; each row says what to write into the bid documents and the price effect on the record.
| If | Then | Price effect on the record | Source |
|---|---|---|---|
| Two or more coverings, a wet or deteriorated roof, or tile | Tear off to the deck | $26.09 to $32.46 per sq ft replacement bids vs $8.82 recover (WSU 2023) | IBC 1512.3; WSU |
| One dry covering and a sound deck on a moisture scan | Price a recover alternate next to the tear-off | Recover at 33.8% of the lowest replacement bid (WSU 2023) | WSU |
| Tear-off removes insulation entirely above the deck | Specify the new-construction R-value, or document technical infeasibility | $1.75 to $1.90 per sq ft per 1.5 in polyiso layer (Tulsa 2023) | Philadelphia L&I; Tulsa |
| Roof under 3,500 sq ft | Budget a higher per-sq-ft price than for a large roof | $28.64 to $44.05 (2022) vs $11.76 to $18.93 on 12,500 sq ft and up (2026) | Columbus |
| Regular foot traffic to rooftop units, or hail exposure | Specify 80 mil and name the product line | 80-mil EXTRA watertight at 30.0 J vs 22.5 J for 60 mil | Carlisle |
| Warranty term is the goal, not puncture resistance | 60 mil can carry the same term as 80 mil | Duro-TECH 15, 20 or 25 years at both thicknesses | Duro-Last |
| Bid or estimate older than 12 months | Escalate with the roofing PPI | +5.7% from Sep 2025 to Sep 2026 (preliminary) | BLS |
Where do cost guides and the bid record disagree?
Most consumer cost guides quote membrane-layer prices as if they were finished roofs. The public record separates the two: Tulsa’s 2023 contract priced the 60-mil fully adhered sheet alone at $3.00 to $3.27 per sq ft, while complete Columbus re-roof bids in April 2026 ran $11.76 to $18.93. Four common claims are compared with the primary record below.
| What a cost guide says | What the primary record shows | Source |
|---|---|---|
| A top-ranking guide updated September 2026: 60-mil TPO costs $4.00 to $6.50 per sq ft installed | The 60-mil membrane line alone was $3.00 to $3.27 (Tulsa 2023); complete re-roof bids were $11.76 to $18.93 (Columbus 2026) | Tulsa; Columbus |
| A guide updated January 2026: 80 mil adds $0.30 to $0.35 per sq ft over 60 mil | None of the 11 public records we compiled prices the difference; treat the figure as an unsourced estimate | CB&C review, Nov 2026 |
| Several guides: tear-off adds $1 to $2 per sq ft | Consistent: $0.97 to $1.25 per sq ft (Tulsa 2023) | Tulsa |
| Several guides: 60-mil warranties run 15 to 20 years | Duro-Last lists 15, 20 and 25-year options for 60-mil Duro-TECH (2024) | Duro-Last |
For every low-slope system side by side, including EPDM, PVC, modified bitumen and coatings, see our flat roof replacement cost guide.
How we compiled this
We read 7 public bid tabulations and contract price sheets (Columbus, Georgia; Tulsa, Oklahoma; Washington State University; Penn State), 4 federal award records from USAspending.gov, 4 TPO maker data sheets, 1 NRCA technical article, 2 code texts and the BLS PPI flat file, all accessed in November 2026. Prices are each agency’s figures divided by the roof area printed on the same record; bids without a stated area or a confirmed TPO scope were excluded. CB&C is a matching service, not a roofer, and nothing here is a quote.
Frequently asked questions
How much does a 10,000 sq ft TPO roof cost?
At the April 2026 Columbus, Georgia bid range of $11.76 to $18.93 per sq ft, a 10,000 sq ft TPO re-roof works out to $117,600 to $189,300. That range comes from roofs of 12,500 to 17,500 sq ft; smaller roofs bid higher per sq ft, such as $31.29 to $37.96 on 9,100 to 10,400 sq ft in Columbus in July 2022.
How much does TPO roofing cost per square?
A roofing square is 100 sq ft. The five April 2026 Columbus, Georgia bids equal $1,176 to $1,893 per square for a complete TPO re-roof, with a median of $1,550. The membrane line alone in Tulsa’s 2023 roofing contract was $300 to $327 per square for 60-mil fully adhered TPO, before insulation, cover board and tear-off.
Is TPO cheaper than EPDM?
On the same City of Tulsa 2023 roofing contract, 60-mil fully adhered TPO was priced at $3.00 to $3.27 per sq ft and 60-mil fully adhered EPDM at $3.75 to $4.19 across three bids, so TPO was $0.75 to $0.92 lower per sq ft on the membrane line. Insulation, cover board and tear-off cost the same under either sheet.
How long does a TPO roof last?
No public record we compiled measures service life, so warranty terms are the documented benchmark. Duro-Last lists 15, 20 and 25-year warranties for its 60 and 80-mil Duro-TECH sheets (October 2024), and Johns Manville’s 2016 JM TPO 80 sheet lists Peak Advantage guarantees of 5 to 30 years. The term depends on the full system specified, not the sheet alone.
Can TPO be installed over an existing roof?
Yes, where the building code allows a recover. IBC Section 1512.3 bars a recover if the existing roof is water-soaked or deteriorated, is slate, clay, cement or asbestos-cement tile, or already has two or more coverings. Washington State University recovered 32,200 sq ft with mechanically fastened 115-mil TPO fleeceback for $284,000 in 2023, after requiring a thermal scan.
How long does a TPO roof installation take?
Bidders on the April 2026 Pop Austin Recreation Center job in Columbus, Georgia, measured at 12,500 to 17,500 sq ft, estimated 14 to 120 working days with average crews of 6 to 12 people. Their start dates ranged from 21 to 100 days after notice to proceed, so material lead time can matter as much as installation time.
Sources
Bid tabulations, awards and price data
- Bid Tabulation, RFB No. 26-0033 (revised), Gallops Senior Center and Pop Austin Recreation Center Roofing Project, April 30, 2026, Columbus Consolidated Government, Georgia. Accessed November 1, 2026.
- Tabulation of Bids, RFB No. 23-0007, Roofing Services at Edgewood Senior Center, September 28, 2022, Columbus Consolidated Government, Georgia. Accessed November 1, 2026.
- Bid Tabulation, RFB No. 22-0041, Roofing Services at Metra Lower Maintenance Shop, July 6, 2022, Columbus Consolidated Government, Georgia. Accessed November 1, 2026.
- Award 697DCK24C00172, roof replacement, Memphis, TN (signed March 26, 2024), USAspending.gov, Federal Aviation Administration. Accessed November 1, 2026.
- Award 70B01C26C00000113, 60-mil TPO roofing system, McAllen, TX (October 1, 2026), USAspending.gov, U.S. Customs and Border Protection. Accessed November 1, 2026.
- Award W911SG25CA044, 72-mil TPO roofing, Building 2416, Fort Bliss, TX (September 15, 2025), USAspending.gov, Department of the Army. Accessed November 1, 2026.
- Award W912BV25FA033, TPO and clay tile roof, Building 2025, Fort Sill, OK (August 26, 2025), USAspending.gov, Department of the Army. Accessed November 1, 2026.
- Food Service Building Replace Roof, bid tabulation (March 14, 2023) and intent to award (March 20, 2023), Washington State University Facilities Services. Accessed November 1, 2026.
- TAC 1015B Roofing Installation, Maintenance and Repair, bid summary, May 25, 2023, City of Tulsa Purchasing. Accessed November 1, 2026.
- TAC 1015C Roofing Installation, Maintenance and Repair, bid summary, June 15, 2023, City of Tulsa Purchasing. Accessed November 1, 2026.
- Bid tab, HB Applied Behavioral Analysis Lab Renovation, roofing, opened February 18, 2025, Penn State Office of Physical Plant. Accessed November 1, 2026.
- PPI industry data, Roofing contractors, nonresidential building work (PCU23816X23816X), U.S. Bureau of Labor Statistics. Accessed November 1, 2026.
- PPI time series flat files (pc.data.0.Current), U.S. Bureau of Labor Statistics. Accessed November 1, 2026.
Maker data sheets, standards and codes
- Sure-Weld TPO technical data sheet (08.11.14), Carlisle SynTec, via RCABC Roofing Practices Manual. Accessed November 1, 2026.
- Duro-TECH TPO60 product data sheet (created October 14, 2024), Duro-Last. Accessed November 1, 2026.
- Duro-TECH TPO80 product data sheet (2024), Duro-Last. Accessed November 1, 2026.
- JM TPO 80 mil technical data sheet, RS-8634 (2016), Johns Manville, via RCABC Roofing Practices Manual. Accessed November 1, 2026.
- TPOs face a changing landscape, Mark S. Graham, August 2017, NRCA Professional Roofing. Accessed November 1, 2026.
- PB_004 FAQ: Roof Covering Replacement, Energy Code (2021 code), City of Philadelphia, Department of Licenses and Inspections. Accessed November 1, 2026.
- 2025 California Building Code, Section 1512: Reroofing, recover and replacement, California Building Standards Commission, text via gocodebook.com. Accessed November 1, 2026.
