
How We Vet Commercial Builders Before Any Introduction
Here is how we vet commercial builders before an introduction: we confirm an active license with the state or local board, read current insurance certificates, ask for the surety's bonding limits, call owners on comparable projects and search OSHA's public inspection records. We do not guarantee workmanship, price or schedule, and owners should re-verify before signing.
How We Vet Commercial Builders: The Five Checks
Every builder in our network goes through the same five checks before we introduce them to a project owner. Each check uses a document the builder gives us and, where one exists, a public record we can look up ourselves. The table below sets out what we look at and, just as plainly, what each check cannot tell you.
| Check | What we ask the builder for | Where we confirm it | What it does not prove |
|---|---|---|---|
| License | License number, license class and the states where the firm holds it | The state licensing board's public lookup, or the city or county where licensing is local | That the builder is skilled at your building type |
| Insurance | Current certificates for general liability, workers' compensation and commercial auto | The certificate itself, read for named insured, dates and limits | That the policy stays in force after we read it |
| Bonding capacity | A letter from the builder's surety with single-job and aggregate limits | The surety letter | That a bond will be issued for your specific contract |
| Comparable projects | Recent projects of similar type and size, with owner contacts | Conversations with those owners | That your project will go the same way |
| OSHA record | The legal name and addresses the firm operates under | OSHA's public establishment search | That a clean record means a safe site; small firms may never have been inspected |
Checks are made at the time a builder joins the network and are point-in-time. Owners should repeat the license and insurance checks before signing.
These checks are the floor, not the ceiling. They screen out builders who cannot show a license, insurance or bonding that fits the work. They do not rank builders against each other, and they are not a substitute for your own due diligence before you sign a contract. Our guide on how to choose a commercial contractor covers the questions only you can ask.
Check 1: License Status With the State Board
We look up the license number on the licensing board's own site, not on a screenshot. We confirm the license is active, that the class covers commercial work of the size in question, and that the name on the license matches the company that will sign the contract. In Florida that means the DBPR license search; in California, the CSLB license check.
Licensing is not uniform. Our state-by-state licensing research found 10 jurisdictions with an examined state license and 8 more with a state license above a project value, while 20 states leave general contractor licensing to cities and counties. Where licensing is local, we check the registration with the city or county where the project sits, plus any state trade licenses for electrical, plumbing and mechanical work.
Number of jurisdictions by licensing model, 50 states and DC
Source: CB&C compilation of state licensing board rules, checked October 2026 (commercial-contractor-licensing-by-state)
Check 2: Certificates of Insurance
We ask for current certificates of insurance and read them line by line: the named insured, the policy dates, and the limits for commercial general liability, workers' compensation and commercial auto. A certificate is a snapshot. Policies can be cancelled or allowed to lapse after the certificate is issued, which is why we tell owners to request a fresh certificate before work starts, together with the additional insured endorsement pages themselves: a certificate only reports coverage, and it is the endorsement that adds the owner to the policy, as our additional insured guide explains.

Check 3: Bonding Capacity
Bonding capacity is the size of contract a surety will stand behind for a given builder. We ask for a letter from the builder's surety that states a single-job limit and an aggregate limit, so we only introduce builders to projects they could bond if the owner or lender asks for it.
On federal work the question is not optional: contracts above $150,000 require both a performance bond and a payment bond, each normally equal to 100 percent of the original contract price under FAR 28.102-2. Many state and local public owners have similar rules. On private jobs, bonds are a choice the owner and lender make.
Check 4: Comparable Project References
We ask for recent projects that resemble the work the builder wants to be introduced for, by building type and approximate size, with a contact at the owner. We talk to those owners about how the job was staffed, how change orders were priced, whether the schedule held and how closeout went. A builder with strong restaurant work may still be a poor fit for a medical office, so references shape which projects a builder is matched to.
When you compare bids yourself, the same questions apply. Our article on how to compare construction bids and the owner project checklist show where references fit in your own process.
Check 5: OSHA Public Record Search
We search the firm's legal name in OSHA's establishment search, which lists federal inspections, citations and penalties. Federal OSHA issued 1,145 citations to nonresidential building contractors in FY2024, and duty to have fall protection (1926.501) was the most cited standard, so we pay attention to fall and scaffold citations. Our OSHA violations research shows what commercial builders are cited for most.
A citation is not automatically disqualifying. We look at what was cited, whether it was contested or abated, and whether the pattern repeats. For builders who want federal work, we also check SAM.gov for an active entity registration and for exclusions.

What We Do Not Check
Being honest about the limits of vetting matters as much as the checks themselves. We do not do the following:
- We do not audit a builder's financial statements, credit history or tax filings.
- We do not run criminal background checks on owners or employees.
- We do not inspect workmanship, visit job sites or test finished buildings.
- We do not vet the builder's subcontractors or suppliers.
- We do not monitor licenses, insurance or bonding continuously after a builder joins.
- We do not use online star ratings as evidence, and we do not publish reviews or rankings of builders.
- We do not guarantee price, schedule, quality or the outcome of any contract.
Your Part of the Process
- Look up the license yourself
Use the state board or local registry where your project sits, and match the license name to the contracting entity.
- Read the certificate of insurance
Check dates and limits against your lease or loan requirements.
- Call two owners
Ask about change orders, schedule and closeout on a project like yours.
- Search OSHA records
Ask the builder to explain any citations you find.
If something we told you about a builder turns out to be wrong, use our report a concern page and we will look into it. To see how the matching model and its funding work, read the purpose of this website or learn more about CB&C. When you are ready, you can compare vetted builders for your project.
Frequently asked questions
Does vetting mean CB&C guarantees a builder's work?
No. Vetting confirms that a builder could show a license, insurance, bonding capacity, comparable references and an OSHA record we reviewed at the time they joined. It does not guarantee quality, price or schedule. Your contract with the builder governs the work.
How often do you re-check builders?
Our checks are point-in-time. We ask builders to tell us about license, insurance or bonding changes, but we do not monitor them continuously, so owners should repeat the license lookup and request a fresh certificate before signing.
What if my state has no state contractor license?
Where licensing is handled by cities and counties, we check the local registration where your project is located and any state trade licenses. Our licensing research lists the model each state uses.
Does an OSHA citation disqualify a builder?
Not automatically. We look at what was cited, whether the citation was contested or abated and whether the same hazard repeats. Repeated fall protection or scaffold citations weigh heavily.
Do you check the builder's subcontractors?
No. Subcontractor selection is the general contractor's responsibility. Ask your builder how they prequalify subcontractors and collect lien waivers from them.
Can a builder pay to skip the checks?
No. Builders may pay for introductions, but every builder goes through the same five checks first, and payment does not change what we check.
Who do I tell if a builder misrepresented something?
Use the report a concern page. Include the builder's name, your project location and what you found, and we will review it.
Sources
- [1] Florida Department of Business and Professional Regulation. Florida DBPR license search (Verify a Licensee). Accessed 2026-10-07.
- [2] California Contractors State License Board. Check a License. Accessed 2026-10-07.
- [3] Occupational Safety and Health Administration. Establishment Search. Accessed 2026-10-07.
- [4] U.S. General Services Administration. SAM.gov search (entity registrations and exclusions). Accessed 2026-10-07.
- [5] Acquisition.gov, General Services Administration. FAR 28.102-1 General (performance and payment bonds). Accessed 2026-10-07.
- [6] Acquisition.gov, General Services Administration. FAR 28.102-2 Amount required. Accessed 2026-10-07.
- [7] Commercial Builders & Contractors research desk. Commercial Contractor License Requirements by State (licensing model counts, 50 states and DC). Accessed 2026-10-07.
- [8] California Contractors State License Board. Step 1: Before Applying for the Examination. Accessed 2026-10-04.
- [9] Maine Office of the Attorney General. Home Construction and Repair. Accessed 2026-10-04.
- [10] Occupational Safety and Health Administration. Frequently Cited OSHA Standards: NAICS 2362 Nonresidential Building Construction, Federal, FY2024 (archived Nov. 10, 2024). Accessed 2026-10-04.
- [11] Occupational Safety and Health Administration. 29 CFR 1926.501 Duty to have fall protection. Accessed 2026-10-07.