Skip to content

Commercial Plumbing Contractor: Licenses, Hourly Rates and How to Hire One

Commercial building mechanical room with insulated water pipes, drain stacks, valves and a pump skid

A commercial plumbing contractor is a state-licensed firm that installs and services plumbing in nonresidential buildings: backflow assemblies, grease interceptors, booster pumps, medical gas. Public bids from 2025 and 2026 price a master plumber at $75 to $149 an hour.

Key takeaways

  • Florida’s plumbing contractor license covers oxygen, nitrous oxide and all related medical gas piping, and a certified (CF) license works statewide while a registered (RF) license works only where it was issued (Fla. Stat. 489.105(3)(m), (8), (10)).
  • In Texas, plumbing permits go to a company’s Responsible Master Plumber or that plumber’s agent, and the master must keep at least $300,000 of general liability coverage on file for each one-year period (Tex. Occ. Code 1301.002(9-a) and 1301.552).
  • North Carolina’s Class II plumbing license and Texas’s Tradesman Plumber-Limited license are limited to houses, so neither covers a commercial building (N.C.G.S. 87-21(b)(1)).
  • Backflow prevention assemblies must be tested at installation, after any repair or relocation and at least once a year under 2024 International Plumbing Code (IPC) section 312.11.2 (ICC, IPC 2024).
  • Public rate sheets put a master plumber’s standard hour at $75 in Little Rock (September 2026), $120 for Maine DOT (June 2025) and $125 to $149 in Collin County, Texas (June 2026), with after-hours rates of $188 to $220 (Collin County bid tab 2026-296).

What does a commercial plumbing contractor do that a residential plumber does not?

A commercial plumbing contractor handles systems most houses never have: testable backflow assemblies, grease interceptors, booster pumps, pressure-reducing stations, medical gas and building drains of 6 inches or more. Each has its own section in the 2024 International Plumbing Code (IPC), the model code published by the International Code Council, and several need a personal credential on top of the plumbing license.

NumberWhat it meansSource
80 psiStatic water pressure above which a building needs a pressure-reducing valveIPC 2024 604.8
1 test a yearMinimum test frequency for backflow prevention assemblies, plus a test at installation and after repairIPC 2024 312.11.2
100 lbGrease a 50 gpm grease interceptor must retainIPC 2024 Table 1003.3.5.1
840 dfuDrainage fixture units a 6-inch building drain carries at 1/4 inch per foot (4-inch: 216)IPC 2024 Table 710.1(1)
$300,000Texas minimum general liability per year for a Responsible Master PlumberTex. Occ. Code 1301.552
$30.67US median hourly wage of plumbers, pipefitters and steamfitters, May 2025BLS OEWS May 2025

The table below maps each commercial-only system to the rule that triggers it and the credential to ask for. A drainage fixture unit (dfu) is the code’s measure of the load a fixture puts on a drain, assigned fixture by fixture in IPC Table 709.1.

SystemWhen a building needs itCode ruleCredential to ask for
Backflow prevention assemblies (reduced pressure, double check)Tested at installation, after repair or relocation and at least annually; air gaps inspected annuallyIPC 312.11.1 and 312.11.2Tester qualified under ASSE 5110; in Texas a Water Supply Protection Specialist endorsement for customer service inspections
Grease interceptorFixtures with grease-laden waste in food preparation areas: restaurants, hotel kitchens, hospitals, school kitchens, bars, cafeterias; not for dwelling unitsIPC 1003.3.1, 1003.3.4, Table 1003.3.5.1Sizing sheet showing flow-through rating in gpm and grease retention in lb
Water pressure booster systemStreet or well pressure too low for the minimum fixture pressures; booster pumps need a low-pressure cutoffIPC 606.5.1, 606.5.5Pump submittal with the low-pressure cutoff setting
Pressure-reducing valveStatic pressure in the building above 80 psiIPC 604.8Valve listed to ASSE 1003 or CSA B356
Medical gas and vacuum pipingHospitals, surgery centers, dental and other clinics with piped oxygen, nitrous oxide or vacuum; installed, tested and labeled to NFPA 99IPC 1202.1ASSE 6010 installer cards; a separate ASSE 6030 verifier; in Texas the medical gas piping endorsement
Large building drainsA 4-inch drain at 1/4 inch per foot carries 216 dfu, a 6-inch 840 dfu and an 8-inch 1,920 dfuIPC Table 710.1(1)Riser and drain sizing on the plumbing drawings

Some jurisdictions adopt the Uniform Plumbing Code instead of the IPC, and every state amends what it adopts, so ask the building department which edition applies before you compare scopes. Licensing law can draw the same line as the code. Florida writes medical gas straight into the plumbing contractor’s scope in section 489.105(3)(m) of the 2026 Florida Statutes, and California’s C-36 class includes gases for medical, dental, commercial and industrial uses and backflow preventers under 16 CCR 832.36.

Florida Statutes 489.105(3)(m) text with a box around air, vacuum, oxygen, nitrous oxide and medical gas piping
Florida’s plumbing contractor scope names oxygen, nitrous oxide and all related medical gas systems. Fla. Stat. 489.105(3)(m), 2026 Florida Statutes, accessed November 1, 2026.

Which license should a commercial plumbing contractor hold?

The license class decides whether a plumbing firm may work on a commercial building at all. The rule to apply: the company, not only one employee, must hold a class with no house-only limit, and the license must show as active on the state lookup the day you sign. The 5 states below show how differently the line is drawn.

State and boardClass that covers commercial workClass that does notMoney tied to the licenseSource
Florida, Construction Industry Licensing Board (DBPR)Certified Plumbing Contractor (CF), valid in any Florida jurisdiction; Registered (RF) only where local competency was metNone within plumbing: the scope is unlimited in the plumbing trade$100,000 public liability and $25,000 property damage insuranceFla. Stat. 489.105; Rule 61G4-15.003; DBPR
Texas, State Board of Plumbing Examiners (TSBPE)A company working under a Responsible Master Plumber; master or journeyman plus endorsement for medical gasTradesman Plumber-Limited: one-family and two-family dwellings onlyGeneral liability of at least $300,000 per one-year period, filed with the boardTex. Occ. Code 1301.002, 1301.356, 1301.552; TSBPE license types
California, Contractors State License Board (CSLB)C-36 Plumbing ContractorNot split by building type$25,000 contractor bond; $100,000 additional bond for an LLC16 CCR 832.36; B&P 7071.6; 7071.6.5
North Carolina, State Board of Examiners of Plumbing, Heating and Fire Sprinkler ContractorsPlumbing Class I: all structuresClass II: single-family detached dwellings onlyNot set in G.S. 87-21N.C.G.S. 87-21(b)(1)
Virginia, Board for Contractors (DPOR)Class A, B or C contractor license with the PLB (plumbing) specialty; a master tradesman license is a conditionClass C stops below $30,000 per contract; Class B below $150,000License class set by contract value: Class A at $150,000 or more per contract or $1 million in 12 monthsVa. Code 54.1-1100; 18VAC50-22-20

Two traps show up on commercial jobs. In Virginia, a commercial building contractor (CBC) classification does not cover plumbing under 18VAC50-22-20, so the general contractor’s license does not stand in for the plumber’s. In Texas, a Responsible Master Plumber may lend the license to one plumbing company only, under section 1301.002(9-a)(A), so check that the master named on the permit works for the firm you are hiring. General contractor licensing is a separate system; our state-by-state registry is in the commercial contractor licensing by state report.

What insurance and bonds should a commercial plumbing contractor carry?

Statutory minimums are licensing floors, not project limits. Florida asks a plumbing contractor for $100,000 of public liability and $25,000 of property damage cover, and Texas asks a Responsible Master Plumber for $300,000 of general liability per year. Set the project limits in your contract, then check that the certificate of insurance names the licensed company.

RequirementAmountWho it applies toSource
Public liability and property damage insurance$100,000 and $25,000 (general contractors: $300,000 and $50,000)Florida certified and registered plumbing contractorsFla. Admin. Code R. 61G4-15.003
Commercial general liabilityAt least $300,000 for all claims in a one-year periodTexas Responsible Master PlumbersTex. Occ. Code 1301.552
Contractor license bond$25,000Every California licensee, including C-36Cal. B&P 7071.6
Additional LLC bond$100,000California licensees organized as an LLCCal. B&P 7071.6.5
Performance and payment bonds (federal)Required on contracts above $150,000Federal construction contractsFAR 28.102-1
Workers’ compensation, class 5183 Plumbing$1.31 to $4.17 per $100 of payroll in the 8 states charted; 51-jurisdiction median $2.70Employers of plumbers; rates effective January 1, 2024Oregon DCBS 2024 premium rate ranking

The Florida rule also sets what a valid certificate must show: the date issued, the agent, the insurer, the policy number, the effective and expiry dates and an insured name that matches the business the license qualifies (Rule 61G4-15.003(2)). That last item catches a common gap, where the certificate names a sister company. Workers’ compensation cost moves bids too. At Florida’s class 5183 rate of $2.97 per $100 of payroll, $500,000 of plumbing payroll carries about $14,850 of manual premium before experience rating; the full table is in our workers compensation rates by state report.

Plumbing workers' comp costs about 3 times as much in California as in ArkansasBars: California $4.17, Connecticut $4.14, Maine $3.49, Florida $2.97, median $2.70, North Carolina $2.60, Texas $2.13, Virginia $1.95, Arkansas $1.31$ per $100 of payrollCalifornia4.17Connecticut4.14Maine3.49Florida2.9751-jurisdiction median2.7North Carolina2.6Texas2.13Virginia1.95Arkansas1.31
Class 5183 plumbing rates run from $1.31 per $100 of payroll in Arkansas to $4.17 in California, against a $2.70 median (Oregon DCBS 2024 study, rates effective January 1, 2024).

Bonds on private work are a contract choice, not a licensing rule, in most of these states; the $150,000 trigger in FAR 28.102-1 applies to federal contracts only. If you want a performance and payment bond on a plumbing package, put it in the bid documents so every bidder prices it; how sureties price and pay those bonds is covered in our construction surety bonds report. This is general information, not insurance or legal advice; ask your insurance broker which limits and additional-insured wording your lender or lease requires.

How much does a commercial plumbing contractor charge per hour?

Public rate sheets are the best free benchmark because the buyer publishes every bid. In 2025 and 2026 bids, a master plumber’s standard hour costs $75 in Little Rock, Arkansas, $120 for Maine DOT and $125 to $149 in Collin County, Texas. After-hours rates in Collin County run $188 to $220, and one Connecticut tab marks up materials 15% to 25%.

Public buyer and documentDateLabor classStandard hourAfter-hours hourMaterial markupSource
City of Little Rock, AR: on-call plumbing renewal, Bid Event 3019 (sole responsive bid, up to $400,000 a year)Board agenda, September 1, 2026Master / journeyman / apprentice$75 / $75 / $45Not priced separatelyNot statedLittle Rock resolution
Maine DOT Region 1: on-call plumbing, contract PH20250514R1PLetting June 11, 2025Master / journeyman / trainee$120 / $98 / $82Not on tabNot on tabMaine DOT bid tab
Collin County, TX: cooperative contract tab 2026-296 (3 cooperative contracts compared)Published June 16, 2026, draft until awardedMaster plumber$125 to $149$188 to $220Not used hereCollin County tab
Collin County, TX: same tabJune 16, 2026Journeyman / apprentice$95 to $141 / $95 to $141$130 to $211.50Not used hereCollin County tab
Town of Greenwich, CT: RFB 7709 heating, cooling and plumbing services (3 bidders)June 29, 2022P1 and P2 plumber$115 to $145$170 to $257 (overtime and double time)15%, 20%, 25%Greenwich bid tabulation
Public buyers pay $75 to $149 for a standard plumber hourGrouped bars: Little Rock $75; Maine DOT $120; Collin County $125 to $149; Greenwich $115 to $145 per hour050.0100150200$ per hour75.075.0Little Rock, AR (Sept2026)120120Maine DOT Region 1 (June2025)125149Collin County, TX (June2026)115145Greenwich, CT (June2022)Lowest standard rateHighest standard rate
Standard master or licensed plumber rates on four public tabs run from $75 (Little Rock, 2026) to $149 (Collin County, 2026); after-hours rates are higher (bid tabulations, accessed November 1, 2026).

Billed rates sit far above wages because they carry the truck, tools, insurance, supervision, overhead and profit. The BLS Occupational Employment and Wage Statistics for May 2025 put the US median wage for plumbers, pipefitters and steamfitters at $30.67 an hour and the mean at $34.70, with the 90th percentile at $52.13, across 465,840 jobs. Collin County’s rate sheet shows the after-hours step: $141 standard becomes $211.50, a 1.5 multiple.

Public jobs add a wage floor. A federal Davis-Bacon wage determination for San Francisco County sets a plumber at $85.50 an hour plus $48.98 in fringe benefits, $134.48 in total (CA20260018, modification 8, September 17, 2026). The Miami-Dade determination sets $32.98 plus $14.49, or $47.47 (FL20260215, modification 1, May 18, 2026). That 2.8-fold gap reaches the bid before overhead is added; our prevailing wage vs market wage analysis compares those floors with market pay.

What does a plumbing service call cost on a public rate sheet?

Multiply each person’s hours by their rate, then add materials times the markup. On Greenwich, Connecticut’s 2022 tab, a four-hour call with a plumber, an apprentice and $600 of parts costs $1,610 to $1,736 at standard rates across the three bidders, and $2,050 at the lowest bidder’s premium rate.

LineBidder A, standardBidder B, standardBidder C, standardBidder C, premium
P2 plumber, 4 hours4 x $134.50 = $5384 x $145 = $5804 x $115 = $4604 x $170 = $680
Registered apprentice, 4 hours4 x $110 = $4404 x $109 = $4364 x $115 = $4604 x $170 = $680
Materials $600 plus markup$600 x 1.25 = $750$600 x 1.20 = $720$600 x 1.15 = $690$600 x 1.15 = $690
Total$1,728$1,736$1,610$2,050

Inputs come from the Town of Greenwich RFB 7709 tabulation (June 29, 2022); the parts value and hours are CB&C assumptions to show the arithmetic. Bidder A’s labor is $38 cheaper than Bidder B’s, but its 25% markup adds $30 more on the parts, so the gap shrinks to $8. Moving the same call to premium hours adds $440, or 47.8% more labor. A public owner prices a full year the same way.

Maine DOT Region 1 line (June 11, 2025)HoursRateAmount
Master plumber400$120$48,000
Journeyman plumber200$98$19,600
Trainee or journeyman-in-training200$82$16,400
Total bid800$105 average$84,000

The Maine DOT tabulation shows why crew mix matters: half the hours at the master rate pull the blended rate to $105. If a contractor staffs routine calls with a master plumber, ask for the journeyman rate on work that does not need a master’s license.

How do you vet a commercial plumbing contractor and compare bids?

Vet the license, the insurance and the people before you look at price, then make every bidder price the same scope on one form. The 6 checks below cover it, each tied to a public record or a document the contractor already holds, and none takes more than an afternoon for a single trade package.

  1. Verify the license class. Search the state lookup by company name: Florida DBPR for a CF or RF plumbing license, TSBPE for the company’s Responsible Master Plumber, CSLB for C-36 and the $25,000 bond on file, the North Carolina board for Class I and Virginia DPOR for PLB at the class that covers your contract value.
  2. Get the certificate of insurance. Ask for the ACORD 25 form, check that the insured name matches the licensed entity and that limits meet your contract, not just the $100,000 Florida or $300,000 Texas floor.
  3. Collect specialty cards. Ask for ASSE 6010 cards for every medical gas installer, ASSE 5110 cards for backflow testers and, in Texas, the medical gas piping or Water Supply Protection Specialist endorsement.
  4. Issue one bid form. Ask for the standard and after-hours rate per labor class, the material markup, any trip charge and written exclusions such as excavation, cutting and patching or fire sprinkler work.
  5. Level the bids. Run your expected hours and parts through each rate sheet, as in the $1,610 to $1,736 example above; our guide to comparing construction bids has a leveling sheet.
  6. Confirm who pulls the permit. The contractor should; in Texas the Responsible Master Plumber is the license holder authorized to obtain permits under section 1301.002(9-a)(B). Ask who books inspections and who files backflow test reports with the water utility.
Six steps to vet a commercial plumbing contractor1 verify the license class on the state lookup. 2 get the certificate of insurance and match limits. 3 collect specialty cards: ASSE 6010 medical gas, ASSE 5110 backflow. 4 issue one bid form with hourly rates, overtime rate, markup and exclusions. 5 level the bids line by line. 6 confirm who pulls the permit and books inspections.Six steps to vet a commercial plumbing contractor1. Verify the license classon the state lookup (FL CF or RF,TX RMP, CA C-36, NC Class I)2. Get the certificate ofinsurance and match limitsto your contract3. Collect specialty cardsASSE 6010 for medical gas,ASSE 5110 for backflow tests4. Issue one bid formhourly rates, overtime rate,markup, scope exclusions5. Level the bidsline by line againstthe same scope6. Confirm who pullsthe permit and booksthe inspections
Six checks before you sign, each tied to a public record: state license lookups, Florida Rule 61G4-15.003, ASSE 6010 and 5110 cards and Texas Occupations Code 1301.002 (accessed November 1, 2026).

On a project run by a general contractor, the plumbing firm is usually a subcontractor with its own lien rights. Ask the general contractor for 2 documents: the plumbing sub’s license number and conditional lien waivers from the sub with each payment application; deadlines differ by state and are listed in our mechanics lien laws by state report. For the wider hiring checklist, see how to choose a commercial contractor.

Which plumbing contractor fits your project?

Match the contractor to the systems in the building and the way the work is bought. A hospital riser, a restaurant fit-out and a monthly service contract need different credentials and different pricing. The 8-row table below sets the rules; the flowchart after it walks the same logic as 4 yes-or-no questions.

IfThenRule or source
The plumbing is part of a new building or major renovation run by a general contractorHire through the GC as a plumbing sub, but check the sub’s license number yourself; in Virginia a CBC license does not cover plumbing18VAC50-22-20
The work includes medical gas or medical vacuum pipingRequire ASSE 6010 installer cards and hire a separate ASSE 6030 verifier; in Texas also the medical gas piping endorsementIPC 1202.1, NFPA 99; Tex. Occ. Code 1301.356
The work drains a commercial kitchenGet an interceptor sized to IPC Table 1003.3.5.1, with gpm and lb on the submittal (50 gpm needs 100 lb)IPC 1003.3.1
It is recurring service or repair workHire directly on an hourly rate sheet with an after-hours rate and a markup cap; compare with public standard rates of $75 to $149Little Rock, Collin County
The building has reduced pressure or double check assembliesBook a yearly test by an ASSE 5110 tester and keep the reportsIPC 312.11.2
Static pressure tops 80 psi, or the main cannot meet fixture pressuresPressure-reducing valve, or a booster pump with a low-pressure cutoffIPC 604.8, 606.5.5
A Virginia contract is $150,000 or moreClass A license with the PLB specialtyVa. Code 54.1-1100
None of the aboveLump-sum bid from a licensed plumbing contractor, compared line by lineSteps above
Which commercial plumbing contractor arrangement fits your projectFour yes or no questions. GC-run project: plumbing sub under the GC, check its license. Medical gas: ASSE 6010 installers and a separate ASSE 6030 verifier. Commercial kitchen: interceptor sized to IPC Table 1003.3.5.1. Recurring service: direct hire on an hourly rate sheet. Otherwise: lump-sum bid from a licensed plumbing contractor.Which commercial plumbing contractor arrangement fits?1. Is the plumbing part of a new building ormajor renovation run by a general contractor?Plumbing sub under the GCcheck the sub's license number yourselfYesNo2. Does the work include medical gasor medical vacuum piping?ASSE 6010 installer cardsplus a separate ASSE 6030 verifierYesNo3. Does the work drain a commercial kitchen(pot sinks, dishwashers, floor sinks)?Interceptor sized to IPC Table 1003.3.5.1gpm and lb on the submittalYesNo4. Is it recurring service or repair workrather than a defined project?Direct hire on an hourly rate sheetwith an overtime rate and markup capYesNoLump-sum bid from a licensed plumbingcontractor, compared line by line
Four questions decide the arrangement: GC-run project, medical gas (ASSE 6010 and 6030), commercial kitchen (IPC Table 1003.3.5.1) or recurring service (hourly rate sheet). Based on IPC 2024 and ASSE Series 6000-2024.

Healthcare jobs add infection control risk assessments (the ICRA 2.0 matrix) and phased shutdowns on top of medical gas; our healthcare construction guide covers those rules. For restaurants, the plumbing layout follows the kitchen plan, so read our commercial kitchen design guide before the plumber prices floor sinks and interceptors.

Kitchen jobs add the interceptor sizing and pump-out rules covered in our grease trap guide.

How we compiled this

We read 24 primary documents on November 1, 2026: plumbing statutes and rules from Florida, Texas, California, North Carolina and Virginia, the 2024 IPC chapters 3, 6, 7, 10 and 12, ASSE standard listings, four public plumbing rate tabulations, BLS May 2025 wage data and two Davis-Bacon wage determinations; the Oregon workers’ compensation study and FAR 28.102-1 figures come from our own October 2026 reports. We did not survey or test contractors; the rates are what public buyers received, not quotes for your job. Georgia and Arizona rules could not be retrieved and are left out.

Frequently asked questions

What is the difference between a commercial plumber and a residential plumber?

A commercial plumber works on systems houses rarely have: backflow assemblies tested every year under IPC 312.11.2, grease interceptors sized by flow, booster pumps, medical gas and drains of 6 inches or more. Some states split the license too: North Carolina’s Class II and Texas’s Tradesman Plumber-Limited are limited to houses, so they do not cover a commercial building.

Do commercial plumbers need a special license?

Usually the license class matters more than a separate commercial license. Florida’s certified plumbing contractor (CF) license covers all plumbing statewide; Texas requires a company to work under a Responsible Master Plumber; California uses the C-36 class; North Carolina requires Class I for non-house work. Medical gas needs an extra endorsement in Texas and ASSE 6010 installer cards on most hospital jobs.

How much does a commercial plumber charge per hour?

Public rate sheets from 2025 and 2026 price a master plumber’s standard hour at $75 in Little Rock, Arkansas, $120 for Maine DOT and $125 to $149 in Collin County, Texas. After-hours rates in Collin County run $188 to $220. Materials are added on top; one Connecticut tab shows markups of 15% to 25%.

How often does a commercial backflow preventer need testing?

Under the 2024 International Plumbing Code, section 312.11.2, reduced pressure, double check and pressure vacuum breaker assemblies are tested when installed, right after any repair or relocation and at least once a year. Ask for a tester qualified under ASSE 5110, and in Texas a Water Supply Protection Specialist for customer service inspections. Your water utility may set its own reporting deadline.

Can any plumber install medical gas piping?

No. IPC 1202.1 sends medical gas work to NFPA 99, and installers are normally qualified under ASSE 6010. Texas law, Occupations Code 1301.356, also requires a master or journeyman license plus a medical gas piping installation endorsement. Florida includes oxygen, nitrous oxide and related medical gas systems in the plumbing contractor’s licensed scope.

Should I hire the plumbing contractor directly or through my general contractor?

On a new building or major renovation, plumbing is normally a subcontract under the general contractor, but you can still check the sub’s license number yourself. For service, repairs and annual backflow testing, hire directly on an hourly rate sheet. In Virginia, a general contractor’s CBC classification does not cover plumbing under 18VAC50-22-20.

Sources

Statutes, codes and standards

Rates, wages and insurance data

Last reviewed November 2026 by the CB&C Editorial Team. See our editorial standards.

← Back to all articles