Skip to content

Cost to Build a Car Wash: What 452 Filed Projects Show for Tunnels, In-Bay and Self-Serve

Single-story concrete block building under construction with open bay ends and new concrete paving

The cost to build a car wash in Texas public records is a median $1.25 million for building and site work, or $279 per sq ft, across 452 projects registered 2022 to 2026. Express tunnels run a median $1.5 million.

Key takeaways

  • Across 452 stand-alone, ground-up car wash registrations filed with the Texas Department of Licensing and Regulation from January 2022 to October 2026, the median estimated construction cost was $1,250,000 and the median building was 4,556 sq ft (TDLR TABS).
  • The 230 records that name a tunnel, express or drive-through format had a median of $1.5 million and $326 per sq ft; the middle half ran $227 to $463 per sq ft (TDLR TABS).
  • Registrations filed in 2026 had a median of $329 per sq ft, against $271 to $282 in each year from 2022 to 2025 (TDLR TABS).
  • A car wash is a special purpose building for SBA 504 loans, so the owner puts in at least 15% of project cost, or 20% for a business 2 years old or less (13 CFR 120.910).
  • A water reclaim system cuts a wash’s fresh water use by 50% to 83%, and EPA’s target for new conveyor washes is 35 gallons of fresh water per vehicle (EPA WaterSense at Work, Section 5.4, November 2023).

How much does it cost to build a car wash?

Filed Texas records put a new stand-alone car wash at a median $1.25 million in estimated construction cost, with the middle half of 452 projects between $900,000 and $2.0 million. That figure is the owner’s or architect’s estimate of building and site work at registration. It excludes land, and it may or may not include the wash equipment package.

Format (as stated in the record)RecordsMedian costMiddle half of costMedian $ per sq ftMedian size
All stand-alone car washes452$1,250,000$900,000 to $2,000,000$2794,556 sq ft
Express, tunnel or drive-through230$1,500,000$1,000,000 to $2,000,000$3264,750 sq ft
Express or tunnel, registered 2025 to 202663$1,500,000$1,200,000 to $2,100,000$3454,696 sq ft
Format not stated in the record213$1,000,000$725,000 to $1,650,000$2594,432 sq ft
In-bay automatic and self-serve (named records below)9$175,000 to $500,000 for single sitessee table below$148 to $3501,000 to 2,760 sq ft

Source: Texas Department of Licensing and Regulation, TABS project search, records registered January 13, 2022 to October 16, 2026, queried November 9, 2026; medians by CB&C. Filtered to new construction, car wash only (no fuel, convenience store, lube or dealership work), one record per address and size, $25 to $1,500 per sq ft.

Texas is the only state that publishes this data at scale. Under the Texas Architectural Barriers Act, projects with an estimated construction cost of $50,000 or more are registered with TDLR before construction, with a $175 filing fee (TDLR project fees). Each record lists the estimated cost, square footage, scope and planned start and finish dates, and 99.8% of the car wash records we kept were privately funded.

What do filed Texas car wash projects cost per square foot?

Express tunnel registrations from 2025 and 2026 ranged from $145 to $959 per sq ft in estimated construction cost, with a median of $345. The low end is CMU (concrete block) buildings with a simple scope; the high end usually bundles site work, vacuum canopies and equipment rooms into one number. The table lists ten records you can open on the TDLR site.

TABS recordCounty, year registeredSizeEstimated cost$ per sq ftScope in the record
TABS2026016218Galveston, 20266,204 sq ft$900,750$145Single tunnel with conveyor, 2 pay lanes, 23 vacuum stalls, CMU walls, paving, MEP, landscaping
TABS2025015468Dallas, 20254,675 sq ft$900,000$193One-story express wash, vacuum canopies, pay station canopy
TABS2025021927Tarrant, 20251,975 sq ft$450,000$228Compact express wash, equipment room, restroom, vacuums, paving and utilities
TABS2025019713McLennan, 20253,900 sq ft$1,200,000$308New express tunnel
TABS2025019202Brazoria, 20254,586 sq ft$1,500,000$327New tunnel car wash
TABS2026016861El Paso, 20264,889 sq ft$2,000,000$409Ground-up tunnel; same plan and estimate filed 6 times in 5 counties
TABS2025013304Tarrant, 20255,000 sq ft$2,200,000$440Tunnel plus site improvements
TABS2026012563Denton, 20265,440 sq ft$2,700,000$496Tunnel, equipment room, office, break room, public restroom
TABS2026006211Bexar, 20255,165 sq ft$2,800,000$542Fully automated tunnel with vacuum equipment
TABS2025013724Collin, 20254,721 sq ft$4,526,500$959Drive-through wash with outside vacuum canopies

Repeat filings show how these numbers are set. One 4,889 sq ft tunnel plan was registered six times in 2025 and 2026, in Harris, Travis, El Paso, Montgomery and Galveston counties, each at exactly $2,000,000. That is a prototype budget, not a bid, so treat a single TABS figure as the owner’s planning number and the median of many as the market signal.

Car wash construction cost per sq ft by Texas marketBar chart: median car wash cost per sq ft is $315 in Dallas-Fort Worth, $264 in Houston and $242 in the Rio Grande Valley.$ per sq ftDallas-Fort Worth (108)315Rest of Texas (152)294San Antonio (53)278Houston (102)264Austin (12)258Rio Grande Valley (25)242
Dallas-Fort Worth car wash registrations had the highest median, $315 per sq ft, and the Rio Grande Valley the lowest, $242. Source: TDLR TABS, 452 records registered January 2022 to October 2026, accessed November 9, 2026.
Texas market (counties)RecordsMedian costMedian $ per sq ftMiddle half, $ per sq ft
Dallas-Fort Worth (Dallas, Tarrant, Collin, Denton)108$1,300,000$315$227 to $499
Rest of Texas152$1,275,000$294$209 to $408
San Antonio (Bexar)53$1,250,000$278$239 to $468
Houston (Harris, Fort Bend, Montgomery)102$1,000,000$264$147 to $394
Austin (Travis, Williamson, Hays)12$1,200,000$258$202 to $480
Rio Grande Valley (Hidalgo, Cameron)25$1,200,000$242$120 to $308

Does building size change the cost per square foot?

Yes, but not in a straight line. Buildings of 4,500 to 5,499 sq ft, the common express tunnel size, had the highest median at $327 per sq ft across 185 records. Small buildings under 2,000 sq ft also ran high at $336, because a tunnel, pay lanes and utilities cost about the same whether the building is short or long.

Car wash cost per sq ft by building sizeBar chart: median cost per sq ft is $336 under 2,000 sq ft, $327 at 4,500 to 5,499 sq ft and $177 at 8,000 sq ft and up.0100200300400$ per sq ft336600 to 1,999 sqft2182,000 to 3,499sq ft2683,500 to 4,499sq ft3274,500 to 5,499sq ft2515,500 to 7,999sq ft1778,000 sq ft andup
The common tunnel size, 4,500 to 5,499 sq ft, ran a median $327 per sq ft across 185 records. Source: TDLR TABS registrations January 2022 to October 2026, accessed November 9, 2026.
Building sizeRecordsMedian costMedian $ per sq ftMiddle half, $ per sq ft
600 to 1,999 sq ft32$475,000$336$179 to $657
2,000 to 3,499 sq ft20$750,000$218$141 to $481
3,500 to 4,499 sq ft156$1,000,000$268$206 to $384
4,500 to 5,499 sq ft185$1,600,000$327$242 to $486
5,500 to 7,999 sq ft48$1,500,000$251$156 to $342
8,000 sq ft and up11$2,500,000$177$68 to $249

About 80% of the tunnel records fall between 3,500 and 5,499 sq ft. Above 8,000 sq ft the price per sq ft drops to a median of $177, because those buildings add lobbies, detail bays or multi-format wash bays that cost less per foot than the tunnel itself. For how car washes compare with offices, retail and warehouses, our commercial construction cost per square foot guide has the wider table.

Car wash cost per sq ft by year registeredLine chart: median car wash cost per sq ft held at $271 to $282 from 2022 to 2025 and rose to $329 in 2026.240260280300320340$ per sq ft20222023202420252026
Median filed cost held between $271 and $282 per sq ft from 2022 to 2025 and reached $329 for 45 records registered in 2026 through October 16. Source: TDLR TABS, accessed November 9, 2026.

What do in-bay automatic and self-serve car washes cost?

Few single-format small washes are registered in Texas, so the evidence is a short list rather than a median. New in-bay automatic and self-serve records ran $175,000 to $500,000 in estimated construction cost for 1,000 to 2,760 sq ft. A combined site with 3 automatic bays and 6 self-serve bays was filed at $3.0 million.

TABS recordCounty, yearWorkSizeEstimated costPer unit
TABS2024024375Harris, 2024New automatic in-bay car wash1,198 sq ft$213,194$178 per sq ft
TABS2024001085Wilbarger, 2023New 40 ft x 20 ft wash with 12 ft x 32 ft utility room1,184 sq ft$175,000$148 per sq ft
TABS2022023487Webb, 2022New self-serve wash, 8 bays with vacuum stations1,000 sq ft$350,000$43,750 per bay
TABS2023007888Comal, 2022Dual-bay wash added at a convenience store2,760 sq ft$500,000$250,000 per bay
TABS2023002419Grayson, 2022In-bay automatic added to a self-serve site (addition)1,052 sq ft$350,000$333 per sq ft
TABS2022022055Travis, 2022Second automatic wash added to a service building (addition)1,370 sq ft$250,000$182 per sq ft
TABS2023017689Wise, 2023Add-on to an existing bay to install automatic equipment367 sq ft$100,000$272 per sq ft
TABS2022014720Wichita, 2022New site: 3 automatic bays, 6 self-serve bays, 12 vacuum stalls8,200 sq ft$3,000,000$366 per sq ft
TABS2026007889Dallas, 2025Convert an in-bay wash into a tunnel (renovation)2,032 sq ft$1,600,000$787 per sq ft

Federal contract awards signed from 2019 to 2022 add four more priced data points, three of them outside Texas. They are public projects built to federal specifications, so read them as a labelled contrast, not a private-market price. The $184,449 tunnel brush system award is equipment only and shows what a single wash package line can cost.

AwardAgency, place, date signedScopeAmountSource
FA481922C0040Air Force, Panama City, FL, Sept. 26, 2022Design-build car wash$2,629,040USAspending.gov
N6247319C0203Navy, San Diego, CA, May 6, 2019Car wash at Marine Corps Recruit Depot$2,596,181USAspending.gov
70B01C20F00001258Customs and Border Protection, Eagle Pass, TX, Sept. 15, 2020Construct stand-alone car wash facility$843,299USAspending.gov
FA700020P0027Air Force, Arvada, CO, Mar. 20, 2020Brush-type wash system for a tunnel (equipment only)$184,449USAspending.gov

What does the filed cost include, and what do you add?

A TABS estimate covers the building and, in many of the 452 records, the paving, utilities and vacuum canopies. Land is never in it. Wash equipment, impact fees, design fees, financing costs and contingency often sit outside it, so a full project budget starts from the construction figure and adds those lines from your own quotes and the rules below.

Budget lineIn a typical TABS figure?Where the number comes fromWhat moves it
Building shell and finishesYesTABS medians above; architect estimateCMU vs pre-engineered metal; tunnel length; lobby or office
Site work: paving, grading, drainage, vacuum canopiesOften (scope says “site work” or “site improvements”)Civil engineer estimate on the site planStacking lane length; number of vacuum stalls; storm detention
Wash equipment: conveyor, arches, dryers, pay stationsVaries by filerEquipment maker quote; federal award above shows $184,449 for one brush system (2020)Tunnel length, friction vs touchless, number of pay lanes
Water reclaim and oil separatorPlumbing is in; reclaim tanks varyEquipment and plumbing quotesLocal reclaim rule; IPC 2021 Section 1003.4; sewer discharge limits
Utility connections and impact feesTaps sometimes; fees noWater and sewer utility fee schedule by meter sizeMeter size, which tracks gallons per car and cars per hour
Design, permits, accessibility reviewNoProposals; TDLR filing fee $175Zoning hearings for a conditional use permit or variance
ContingencyNoGSA P120 carries 7% for new constructionDesign completeness, ground conditions
LandNoBroker comps and appraisalCorner lot, stacking depth, separation rules

Our commercial site plan guide covers what the civil set must show for drives, utilities and stormwater, which is where the 200 ft stacking lane and the separator get priced.

Which rules add cost to a car wash?

Five rules drive most of the cost that is unique to car washes: an oil separator under IPC 2021 Section 1003.4, water reclaim mandates, stacking lane minimums in zoning, a ban on wash water reaching storm drains, and noise limits that push vacuum screening. Each one adds equipment, pavement or land, and the stricter versions show up as conditions on a car wash approval.

RuleWhat it saysCost effectSource
Oil separatorCar washing facilities must discharge oil-bearing and grease-bearing waste through an oil separator before the building drainSeparator, sampling access and pumping contract in the plumbing budgetIPC 2021 Section 1003.4
Water reclaimA reclaim system is required to recycle water to the maximum degree the equipment allowsReclaim tanks and treatment; cuts fresh water use 50% to 83% (EPA)Tallmadge, Ohio Ord. 2023-82, item xxi
Stacking lanesAt least 10 off-street stacking spaces per car wash lane, each 8 ft x 20 ft200 ft of queue and 1,600 sq ft of pavement per laneTallmadge Ord. 2023-82, item xiii
No off-site wash waterWash water may not leave the property, sheet flow off the site or drain to a stormwater conveyanceTrench drains to the sanitary sewer through the separator; gradingTallmadge Ord. 2023-82, item xxiv
Noise45 dB(A) at the property line from 9 PM to 7 AM and 55 dB(A) at other hours; noise study approved by the city engineerVacuum enclosures, screen walls, acoustic study feeTallmadge Ord. 2023-82, items xvii and xviii
SeparationCar wash lots at least 500 ft from homes, parks, trails, schools and places of worshipFewer eligible sites, higher land priceTallmadge Ord. 2023-82, item i
Drought programsGeorgia requires car wash certification; Denver Water and San Antonio Water System run car wash programsReclaim and nozzle limits (3.0 gallons per minute self-serve) to keep operating in droughtEPA WaterSense at Work 5.4
Plan of a 10-car stacking lane: ten 8 by 20 ft spaces make 200 ft of queue before the pay stationStacking lane under Tallmadge, Ohio Ord. 2023-82: 10 spaces per lane, each 8 ft x 20 ft12345678910Pay station /tunnel entrytraffic flow8 ft200 ft of queue per lane (10 x 20 ft)20 ftQueue pavement: 10 x 8 ft x 20 ft = 1,600 sq ft per lane; 2 pay lanes = 3,200 sq ft before drive aislesSame code: no wash water may leave the lot or enter a storm drain; water reclaim system required;45 dB(A) at the property line 9 PM to 7 AM and 55 dB(A) other hours; 500 ft from homes, parks and schoolsSource: City of Tallmadge, Ohio, Ordinance 2023-82, Exhibit A, Section 1104.07 E(8), items i, xiii, xvii, xxi, xxiv
Ten 8 ft x 20 ft stacking spaces per lane add 200 ft of queue and 1,600 sq ft of pavement. Source: City of Tallmadge, Ohio, Ordinance 2023-82, Exhibit A, filed for the October 25, 2023 hearing, accessed November 9, 2026.

The Tallmadge, Ohio text is used here because it states each rule in one place; it was filed for a council hearing on October 25, 2023, and other cities set different numbers. Before you buy land, pull your city’s car wash use regulations and ask the planner three things: how many stacking spaces per lane, whether reclaim is required, and whether a car wash needs a hearing. Where a hearing is required, our guide to the conditional use permit process covers findings and timing.

Water use sets the meter size and the sewer bill. EPA’s November 2023 guidance reports conveyor washes averaging 30 gallons of fresh water per vehicle in a 2018 industry study, against 65.8 gallons for a friction conveyor with no reclaim, and in-bay automatics at 44.8 gallons, or as little as 19.1 with reclaim (EPA WaterSense at Work, Section 5.4). Car washes are Group B occupancies under IBC Section 304.1, the same group as offices, which our occupancy classification guide explains.

Worked example: what does a 4,750 sq ft express tunnel cost?

A 4,750 sq ft express tunnel, the median Texas tunnel size, comes to about $1.75 million for construction plus contingency at 2025 to 2026 filed prices. Equipment, land and fees are added from quotes. Under SBA 504, the owner’s minimum cash on the construction portion alone is $263,019, because a car wash counts as a special purpose building.

LineInputArithmeticResultSource
Building and site work4,750 sq ft at $345 per sq ft4,750 x $345$1,638,750TABS tunnel median, 2025 to 2026 registrations
Contingency7% for new construction$1,638,750 x 0.07$114,713GSA P120
Construction subtotal$1,638,750 + $114,713$1,753,463Arithmetic
SBA 504 owner money, special purpose15% of project cost$1,753,463 x 0.15$263,01913 CFR 120.910(a)(2)
Same, if the building were not special purpose10%$1,753,463 x 0.10$175,34613 CFR 120.910(a)(4)
Stacking pavement, 2 pay lanes10 spaces x 8 ft x 20 ft per lane2 x 1,600 sq ft3,200 sq ft before aislesTallmadge Ord. 2023-82
Fresh water at 100,000 cars a year, with reclaim30 gallons per vehicle100,000 x 303,000,000 gallonsEPA WaterSense 5.4
Fresh water, friction conveyor without reclaim65.8 gallons per vehicle100,000 x 65.86,580,000 gallonsEPA WaterSense 5.4

The 100,000 cars a year is an input to replace with your own traffic study; the gallons scale in a straight line with it. The SBA rule adds $87,673 of owner cash on this subtotal compared with an office building, and the gap grows once equipment and land are added to project cost. Our guide to the SBA 504 loan shows the full 50/40/10 structure, and the commercial construction loan guide covers the 80% loan-to-value cap banks use on the rest.

How long does it take to build a car wash?

Texas car wash registrations plan a median of 8.1 months from construction start to completion, and the middle half plan 6.1 to 12.0 months. The 230 tunnel records alone plan a median of 8.4 months. These are the dates filed before work begins, so they exclude land purchase, zoning hearings and design, which come first.

GroupRecords25th percentileMedian75th percentile
All stand-alone car washes4526.1 months8.1 months12.0 months
Express, tunnel or drive-through2306.2 months8.4 months12.0 months

Source: planned start and completion dates in TDLR TABS records, 2022 to 2026, computed by CB&C. Our construction schedule guide shows the same planned-duration data for warehouses, restaurants and retail.

Which car wash type fits your site and budget?

Start from the construction budget you can finance without land, then test the lot against stacking, drains, water and financing rules. Filed Texas records show in-bay and self-serve sites at $175,000 to $500,000, and the middle half of tunnels at $1.0 million to $2.0 million. The table and flowchart hold the same logic.

IfThenBasis
Construction budget excluding land is under $500,000Price an in-bay automatic or self-serve site; a tunnel is unlikelyTABS in-bay and self-serve records: $175,000 to $500,000
Budget is $1.0 million to $2.0 millionAn express tunnel of 4,200 to 5,180 sq ft fits the middle of the marketMiddle half of 230 TABS tunnel records
Budget is above $2.5 millionCheck what the scope adds: only 10% of 452 projects were filed above thatTABS records 2022 to 2026
The lot cannot hold 200 ft of queue per laneAsk about a conditional use permit or variance, or switch to an in-bay formatTallmadge Ord. 2023-82 item xiii as an example rule
The wash bay has floor or trench drainsBudget an oil separator before the building drainIPC 2021 Section 1003.4
The city or water utility requires reclaim or drought certificationSpecify reclaim; design to 35 gallons per car (tunnel) or 40 (in-bay)EPA WaterSense at Work 5.4
You will finance with SBA 504Plan 15% owner money, 20% if the business is 2 years old or less13 CFR 120.910
Flowchart picking a car wash type by construction budget, then checking stacking, drains, reclaim and SBA equityConstruction budget, excluding land(building and site work as filed in TDLR TABS)Under $500,000In-bay automatic orself-serve bays(TABS: $175,000 to $500,000)$1.0M to $2.0MExpress tunnel,4,200 to 5,180 sq ft(middle half, 230 tunnels)Over $2.5MLarge tunnel ormulti-format site(10% of 452 projects)Can the lot queue 10 cars per lane?10 spaces x 8 ft x 20 ft = 200 ft of lane (Tallmadge, Ohio)NoCUP,variance orin-bayYesFloor or trench drains in the wash bay?Oil separator required: IPC 2021 Section 1003.4Does the utility or city require reclaim?Target 35 gal per car tunnel, 40 gal in-bay (EPA)Financing with SBA 504?Car wash = special purpose: 15% owner equity, 20% if newSources: TDLR TABS registrations 2022 to 2026; Tallmadge Ord. 2023-82; ICC IPC 2021; EPA WaterSense (2023); 13 CFR 120.910
Budget bands from 452 TDLR TABS car wash records (2022 to 2026), then the stacking, oil separator, reclaim and SBA 504 checks. Sources: TDLR TABS; Tallmadge Ord. 2023-82; IPC 2021 Section 1003.4; EPA WaterSense (2023); 13 CFR 120.910.

If the lot fails the stacking test, our guide to a zoning variance explains the hardship standard a board applies before it relaxes a numeric rule such as a 10-car queue.

Lot layout limits are covered in our setback requirements guide, and the screen walls many towns require are priced in our cinder block wall cost guide.

How we compiled this

We queried the TDLR TABS project search on November 9, 2026 for names containing “car wash” or “carwash” registered since January 1, 2022 (615 records), read each project page, and kept 452 new, stand-alone car wash records after removing fuel, convenience store, lube and dealership projects, duplicate filings and per sq ft outliers. We added 4 USAspending.gov awards, the IPC 2021, EPA WaterSense guidance, one municipal ordinance and 13 CFR 120.910. TABS costs are owner estimates at registration, not final costs, and this page is not legal or lending advice.

Frequently asked questions

How much does it cost to build a car wash?

In Texas public records, a new stand-alone car wash had a median estimated construction cost of $1,250,000, or $279 per sq ft, across 452 projects registered from 2022 to 2026. The middle half ran $900,000 to $2.0 million. Land, impact fees and often the wash equipment are extra (TDLR TABS).

How much does an express tunnel car wash cost to build?

The 230 Texas records that name a tunnel, express or drive-through format had a median estimated construction cost of $1.5 million and $326 per sq ft for a median 4,750 sq ft building. Records filed in 2025 and 2026 had a median of $345 per sq ft (TDLR TABS).

How much does an in-bay automatic car wash cost?

A new automatic in-bay car wash in Harris County, Texas was registered in 2024 at $213,194 for 1,198 sq ft, and an in-bay added to a Grayson County self-serve site was filed at $350,000 in 2022. Both figures are construction estimates and exclude land (TDLR TABS).

How much does a self-serve car wash cost to build?

A new 8-bay self-serve car wash with vacuum stations in Webb County, Texas was registered in 2022 at an estimated $350,000, or $43,750 per bay, for a 1,000 sq ft building. Self-serve nozzles should flow no more than 3.0 gallons per minute under EPA WaterSense guidance (EPA, 2023).

Is a water reclaim system required for a car wash?

It depends on the city or water utility. Tallmadge, Ohio’s 2023 car wash ordinance requires a reclaim system and bans wash water leaving the lot, and Georgia requires car wash certification. EPA reports reclaim cuts fresh water use by 50% to 83% (EPA WaterSense at Work 5.4).

How much down payment do you need for a car wash SBA loan?

Under the SBA 504 program a car wash is a limited or special purpose building, so the borrower contributes at least 15% of project cost, or 20% if the business has operated two years or less, against 10% for an ordinary building (13 CFR 120.910). This is not lending advice.

Sources

Last reviewed November 2026 by the CB&C Editorial Team. See our editorial standards.

← Back to all articles