A commercial plumbing contractor is a state-licensed firm that installs and services plumbing in nonresidential buildings: backflow assemblies, grease interceptors, booster pumps, medical gas. Public bids from 2025 and 2026 price a master plumber at $75 to $149 an hour.
Key takeaways
- Florida’s plumbing contractor license covers oxygen, nitrous oxide and all related medical gas piping, and a certified (CF) license works statewide while a registered (RF) license works only where it was issued (Fla. Stat. 489.105(3)(m), (8), (10)).
- In Texas, plumbing permits go to a company’s Responsible Master Plumber or that plumber’s agent, and the master must keep at least $300,000 of general liability coverage on file for each one-year period (Tex. Occ. Code 1301.002(9-a) and 1301.552).
- North Carolina’s Class II plumbing license and Texas’s Tradesman Plumber-Limited license are limited to houses, so neither covers a commercial building (N.C.G.S. 87-21(b)(1)).
- Backflow prevention assemblies must be tested at installation, after any repair or relocation and at least once a year under 2024 International Plumbing Code (IPC) section 312.11.2 (ICC, IPC 2024).
- Public rate sheets put a master plumber’s standard hour at $75 in Little Rock (September 2026), $120 for Maine DOT (June 2025) and $125 to $149 in Collin County, Texas (June 2026), with after-hours rates of $188 to $220 (Collin County bid tab 2026-296).
What does a commercial plumbing contractor do that a residential plumber does not?
A commercial plumbing contractor handles systems most houses never have: testable backflow assemblies, grease interceptors, booster pumps, pressure-reducing stations, medical gas and building drains of 6 inches or more. Each has its own section in the 2024 International Plumbing Code (IPC), the model code published by the International Code Council, and several need a personal credential on top of the plumbing license.
| Number | What it means | Source |
|---|---|---|
| 80 psi | Static water pressure above which a building needs a pressure-reducing valve | IPC 2024 604.8 |
| 1 test a year | Minimum test frequency for backflow prevention assemblies, plus a test at installation and after repair | IPC 2024 312.11.2 |
| 100 lb | Grease a 50 gpm grease interceptor must retain | IPC 2024 Table 1003.3.5.1 |
| 840 dfu | Drainage fixture units a 6-inch building drain carries at 1/4 inch per foot (4-inch: 216) | IPC 2024 Table 710.1(1) |
| $300,000 | Texas minimum general liability per year for a Responsible Master Plumber | Tex. Occ. Code 1301.552 |
| $30.67 | US median hourly wage of plumbers, pipefitters and steamfitters, May 2025 | BLS OEWS May 2025 |
The table below maps each commercial-only system to the rule that triggers it and the credential to ask for. A drainage fixture unit (dfu) is the code’s measure of the load a fixture puts on a drain, assigned fixture by fixture in IPC Table 709.1.
| System | When a building needs it | Code rule | Credential to ask for |
|---|---|---|---|
| Backflow prevention assemblies (reduced pressure, double check) | Tested at installation, after repair or relocation and at least annually; air gaps inspected annually | IPC 312.11.1 and 312.11.2 | Tester qualified under ASSE 5110; in Texas a Water Supply Protection Specialist endorsement for customer service inspections |
| Grease interceptor | Fixtures with grease-laden waste in food preparation areas: restaurants, hotel kitchens, hospitals, school kitchens, bars, cafeterias; not for dwelling units | IPC 1003.3.1, 1003.3.4, Table 1003.3.5.1 | Sizing sheet showing flow-through rating in gpm and grease retention in lb |
| Water pressure booster system | Street or well pressure too low for the minimum fixture pressures; booster pumps need a low-pressure cutoff | IPC 606.5.1, 606.5.5 | Pump submittal with the low-pressure cutoff setting |
| Pressure-reducing valve | Static pressure in the building above 80 psi | IPC 604.8 | Valve listed to ASSE 1003 or CSA B356 |
| Medical gas and vacuum piping | Hospitals, surgery centers, dental and other clinics with piped oxygen, nitrous oxide or vacuum; installed, tested and labeled to NFPA 99 | IPC 1202.1 | ASSE 6010 installer cards; a separate ASSE 6030 verifier; in Texas the medical gas piping endorsement |
| Large building drains | A 4-inch drain at 1/4 inch per foot carries 216 dfu, a 6-inch 840 dfu and an 8-inch 1,920 dfu | IPC Table 710.1(1) | Riser and drain sizing on the plumbing drawings |
Some jurisdictions adopt the Uniform Plumbing Code instead of the IPC, and every state amends what it adopts, so ask the building department which edition applies before you compare scopes. Licensing law can draw the same line as the code. Florida writes medical gas straight into the plumbing contractor’s scope in section 489.105(3)(m) of the 2026 Florida Statutes, and California’s C-36 class includes gases for medical, dental, commercial and industrial uses and backflow preventers under 16 CCR 832.36.

Which license should a commercial plumbing contractor hold?
The license class decides whether a plumbing firm may work on a commercial building at all. The rule to apply: the company, not only one employee, must hold a class with no house-only limit, and the license must show as active on the state lookup the day you sign. The 5 states below show how differently the line is drawn.
| State and board | Class that covers commercial work | Class that does not | Money tied to the license | Source |
|---|---|---|---|---|
| Florida, Construction Industry Licensing Board (DBPR) | Certified Plumbing Contractor (CF), valid in any Florida jurisdiction; Registered (RF) only where local competency was met | None within plumbing: the scope is unlimited in the plumbing trade | $100,000 public liability and $25,000 property damage insurance | Fla. Stat. 489.105; Rule 61G4-15.003; DBPR |
| Texas, State Board of Plumbing Examiners (TSBPE) | A company working under a Responsible Master Plumber; master or journeyman plus endorsement for medical gas | Tradesman Plumber-Limited: one-family and two-family dwellings only | General liability of at least $300,000 per one-year period, filed with the board | Tex. Occ. Code 1301.002, 1301.356, 1301.552; TSBPE license types |
| California, Contractors State License Board (CSLB) | C-36 Plumbing Contractor | Not split by building type | $25,000 contractor bond; $100,000 additional bond for an LLC | 16 CCR 832.36; B&P 7071.6; 7071.6.5 |
| North Carolina, State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors | Plumbing Class I: all structures | Class II: single-family detached dwellings only | Not set in G.S. 87-21 | N.C.G.S. 87-21(b)(1) |
| Virginia, Board for Contractors (DPOR) | Class A, B or C contractor license with the PLB (plumbing) specialty; a master tradesman license is a condition | Class C stops below $30,000 per contract; Class B below $150,000 | License class set by contract value: Class A at $150,000 or more per contract or $1 million in 12 months | Va. Code 54.1-1100; 18VAC50-22-20 |
Two traps show up on commercial jobs. In Virginia, a commercial building contractor (CBC) classification does not cover plumbing under 18VAC50-22-20, so the general contractor’s license does not stand in for the plumber’s. In Texas, a Responsible Master Plumber may lend the license to one plumbing company only, under section 1301.002(9-a)(A), so check that the master named on the permit works for the firm you are hiring. General contractor licensing is a separate system; our state-by-state registry is in the commercial contractor licensing by state report.
What insurance and bonds should a commercial plumbing contractor carry?
Statutory minimums are licensing floors, not project limits. Florida asks a plumbing contractor for $100,000 of public liability and $25,000 of property damage cover, and Texas asks a Responsible Master Plumber for $300,000 of general liability per year. Set the project limits in your contract, then check that the certificate of insurance names the licensed company.
| Requirement | Amount | Who it applies to | Source |
|---|---|---|---|
| Public liability and property damage insurance | $100,000 and $25,000 (general contractors: $300,000 and $50,000) | Florida certified and registered plumbing contractors | Fla. Admin. Code R. 61G4-15.003 |
| Commercial general liability | At least $300,000 for all claims in a one-year period | Texas Responsible Master Plumbers | Tex. Occ. Code 1301.552 |
| Contractor license bond | $25,000 | Every California licensee, including C-36 | Cal. B&P 7071.6 |
| Additional LLC bond | $100,000 | California licensees organized as an LLC | Cal. B&P 7071.6.5 |
| Performance and payment bonds (federal) | Required on contracts above $150,000 | Federal construction contracts | FAR 28.102-1 |
| Workers’ compensation, class 5183 Plumbing | $1.31 to $4.17 per $100 of payroll in the 8 states charted; 51-jurisdiction median $2.70 | Employers of plumbers; rates effective January 1, 2024 | Oregon DCBS 2024 premium rate ranking |
The Florida rule also sets what a valid certificate must show: the date issued, the agent, the insurer, the policy number, the effective and expiry dates and an insured name that matches the business the license qualifies (Rule 61G4-15.003(2)). That last item catches a common gap, where the certificate names a sister company. Workers’ compensation cost moves bids too. At Florida’s class 5183 rate of $2.97 per $100 of payroll, $500,000 of plumbing payroll carries about $14,850 of manual premium before experience rating; the full table is in our workers compensation rates by state report.
Bonds on private work are a contract choice, not a licensing rule, in most of these states; the $150,000 trigger in FAR 28.102-1 applies to federal contracts only. If you want a performance and payment bond on a plumbing package, put it in the bid documents so every bidder prices it; how sureties price and pay those bonds is covered in our construction surety bonds report. This is general information, not insurance or legal advice; ask your insurance broker which limits and additional-insured wording your lender or lease requires.
How much does a commercial plumbing contractor charge per hour?
Public rate sheets are the best free benchmark because the buyer publishes every bid. In 2025 and 2026 bids, a master plumber’s standard hour costs $75 in Little Rock, Arkansas, $120 for Maine DOT and $125 to $149 in Collin County, Texas. After-hours rates in Collin County run $188 to $220, and one Connecticut tab marks up materials 15% to 25%.
| Public buyer and document | Date | Labor class | Standard hour | After-hours hour | Material markup | Source |
|---|---|---|---|---|---|---|
| City of Little Rock, AR: on-call plumbing renewal, Bid Event 3019 (sole responsive bid, up to $400,000 a year) | Board agenda, September 1, 2026 | Master / journeyman / apprentice | $75 / $75 / $45 | Not priced separately | Not stated | Little Rock resolution |
| Maine DOT Region 1: on-call plumbing, contract PH20250514R1P | Letting June 11, 2025 | Master / journeyman / trainee | $120 / $98 / $82 | Not on tab | Not on tab | Maine DOT bid tab |
| Collin County, TX: cooperative contract tab 2026-296 (3 cooperative contracts compared) | Published June 16, 2026, draft until awarded | Master plumber | $125 to $149 | $188 to $220 | Not used here | Collin County tab |
| Collin County, TX: same tab | June 16, 2026 | Journeyman / apprentice | $95 to $141 / $95 to $141 | $130 to $211.50 | Not used here | Collin County tab |
| Town of Greenwich, CT: RFB 7709 heating, cooling and plumbing services (3 bidders) | June 29, 2022 | P1 and P2 plumber | $115 to $145 | $170 to $257 (overtime and double time) | 15%, 20%, 25% | Greenwich bid tabulation |
Billed rates sit far above wages because they carry the truck, tools, insurance, supervision, overhead and profit. The BLS Occupational Employment and Wage Statistics for May 2025 put the US median wage for plumbers, pipefitters and steamfitters at $30.67 an hour and the mean at $34.70, with the 90th percentile at $52.13, across 465,840 jobs. Collin County’s rate sheet shows the after-hours step: $141 standard becomes $211.50, a 1.5 multiple.
Public jobs add a wage floor. A federal Davis-Bacon wage determination for San Francisco County sets a plumber at $85.50 an hour plus $48.98 in fringe benefits, $134.48 in total (CA20260018, modification 8, September 17, 2026). The Miami-Dade determination sets $32.98 plus $14.49, or $47.47 (FL20260215, modification 1, May 18, 2026). That 2.8-fold gap reaches the bid before overhead is added; our prevailing wage vs market wage analysis compares those floors with market pay.
What does a plumbing service call cost on a public rate sheet?
Multiply each person’s hours by their rate, then add materials times the markup. On Greenwich, Connecticut’s 2022 tab, a four-hour call with a plumber, an apprentice and $600 of parts costs $1,610 to $1,736 at standard rates across the three bidders, and $2,050 at the lowest bidder’s premium rate.
| Line | Bidder A, standard | Bidder B, standard | Bidder C, standard | Bidder C, premium |
|---|---|---|---|---|
| P2 plumber, 4 hours | 4 x $134.50 = $538 | 4 x $145 = $580 | 4 x $115 = $460 | 4 x $170 = $680 |
| Registered apprentice, 4 hours | 4 x $110 = $440 | 4 x $109 = $436 | 4 x $115 = $460 | 4 x $170 = $680 |
| Materials $600 plus markup | $600 x 1.25 = $750 | $600 x 1.20 = $720 | $600 x 1.15 = $690 | $600 x 1.15 = $690 |
| Total | $1,728 | $1,736 | $1,610 | $2,050 |
Inputs come from the Town of Greenwich RFB 7709 tabulation (June 29, 2022); the parts value and hours are CB&C assumptions to show the arithmetic. Bidder A’s labor is $38 cheaper than Bidder B’s, but its 25% markup adds $30 more on the parts, so the gap shrinks to $8. Moving the same call to premium hours adds $440, or 47.8% more labor. A public owner prices a full year the same way.
| Maine DOT Region 1 line (June 11, 2025) | Hours | Rate | Amount |
|---|---|---|---|
| Master plumber | 400 | $120 | $48,000 |
| Journeyman plumber | 200 | $98 | $19,600 |
| Trainee or journeyman-in-training | 200 | $82 | $16,400 |
| Total bid | 800 | $105 average | $84,000 |
The Maine DOT tabulation shows why crew mix matters: half the hours at the master rate pull the blended rate to $105. If a contractor staffs routine calls with a master plumber, ask for the journeyman rate on work that does not need a master’s license.
How do you vet a commercial plumbing contractor and compare bids?
Vet the license, the insurance and the people before you look at price, then make every bidder price the same scope on one form. The 6 checks below cover it, each tied to a public record or a document the contractor already holds, and none takes more than an afternoon for a single trade package.
- Verify the license class. Search the state lookup by company name: Florida DBPR for a CF or RF plumbing license, TSBPE for the company’s Responsible Master Plumber, CSLB for C-36 and the $25,000 bond on file, the North Carolina board for Class I and Virginia DPOR for PLB at the class that covers your contract value.
- Get the certificate of insurance. Ask for the ACORD 25 form, check that the insured name matches the licensed entity and that limits meet your contract, not just the $100,000 Florida or $300,000 Texas floor.
- Collect specialty cards. Ask for ASSE 6010 cards for every medical gas installer, ASSE 5110 cards for backflow testers and, in Texas, the medical gas piping or Water Supply Protection Specialist endorsement.
- Issue one bid form. Ask for the standard and after-hours rate per labor class, the material markup, any trip charge and written exclusions such as excavation, cutting and patching or fire sprinkler work.
- Level the bids. Run your expected hours and parts through each rate sheet, as in the $1,610 to $1,736 example above; our guide to comparing construction bids has a leveling sheet.
- Confirm who pulls the permit. The contractor should; in Texas the Responsible Master Plumber is the license holder authorized to obtain permits under section 1301.002(9-a)(B). Ask who books inspections and who files backflow test reports with the water utility.
On a project run by a general contractor, the plumbing firm is usually a subcontractor with its own lien rights. Ask the general contractor for 2 documents: the plumbing sub’s license number and conditional lien waivers from the sub with each payment application; deadlines differ by state and are listed in our mechanics lien laws by state report. For the wider hiring checklist, see how to choose a commercial contractor.
Which plumbing contractor fits your project?
Match the contractor to the systems in the building and the way the work is bought. A hospital riser, a restaurant fit-out and a monthly service contract need different credentials and different pricing. The 8-row table below sets the rules; the flowchart after it walks the same logic as 4 yes-or-no questions.
| If | Then | Rule or source |
|---|---|---|
| The plumbing is part of a new building or major renovation run by a general contractor | Hire through the GC as a plumbing sub, but check the sub’s license number yourself; in Virginia a CBC license does not cover plumbing | 18VAC50-22-20 |
| The work includes medical gas or medical vacuum piping | Require ASSE 6010 installer cards and hire a separate ASSE 6030 verifier; in Texas also the medical gas piping endorsement | IPC 1202.1, NFPA 99; Tex. Occ. Code 1301.356 |
| The work drains a commercial kitchen | Get an interceptor sized to IPC Table 1003.3.5.1, with gpm and lb on the submittal (50 gpm needs 100 lb) | IPC 1003.3.1 |
| It is recurring service or repair work | Hire directly on an hourly rate sheet with an after-hours rate and a markup cap; compare with public standard rates of $75 to $149 | Little Rock, Collin County |
| The building has reduced pressure or double check assemblies | Book a yearly test by an ASSE 5110 tester and keep the reports | IPC 312.11.2 |
| Static pressure tops 80 psi, or the main cannot meet fixture pressures | Pressure-reducing valve, or a booster pump with a low-pressure cutoff | IPC 604.8, 606.5.5 |
| A Virginia contract is $150,000 or more | Class A license with the PLB specialty | Va. Code 54.1-1100 |
| None of the above | Lump-sum bid from a licensed plumbing contractor, compared line by line | Steps above |
Healthcare jobs add infection control risk assessments (the ICRA 2.0 matrix) and phased shutdowns on top of medical gas; our healthcare construction guide covers those rules. For restaurants, the plumbing layout follows the kitchen plan, so read our commercial kitchen design guide before the plumber prices floor sinks and interceptors.
Kitchen jobs add the interceptor sizing and pump-out rules covered in our grease trap guide.
How we compiled this
We read 24 primary documents on November 1, 2026: plumbing statutes and rules from Florida, Texas, California, North Carolina and Virginia, the 2024 IPC chapters 3, 6, 7, 10 and 12, ASSE standard listings, four public plumbing rate tabulations, BLS May 2025 wage data and two Davis-Bacon wage determinations; the Oregon workers’ compensation study and FAR 28.102-1 figures come from our own October 2026 reports. We did not survey or test contractors; the rates are what public buyers received, not quotes for your job. Georgia and Arizona rules could not be retrieved and are left out.
Frequently asked questions
What is the difference between a commercial plumber and a residential plumber?
A commercial plumber works on systems houses rarely have: backflow assemblies tested every year under IPC 312.11.2, grease interceptors sized by flow, booster pumps, medical gas and drains of 6 inches or more. Some states split the license too: North Carolina’s Class II and Texas’s Tradesman Plumber-Limited are limited to houses, so they do not cover a commercial building.
Do commercial plumbers need a special license?
Usually the license class matters more than a separate commercial license. Florida’s certified plumbing contractor (CF) license covers all plumbing statewide; Texas requires a company to work under a Responsible Master Plumber; California uses the C-36 class; North Carolina requires Class I for non-house work. Medical gas needs an extra endorsement in Texas and ASSE 6010 installer cards on most hospital jobs.
How much does a commercial plumber charge per hour?
Public rate sheets from 2025 and 2026 price a master plumber’s standard hour at $75 in Little Rock, Arkansas, $120 for Maine DOT and $125 to $149 in Collin County, Texas. After-hours rates in Collin County run $188 to $220. Materials are added on top; one Connecticut tab shows markups of 15% to 25%.
How often does a commercial backflow preventer need testing?
Under the 2024 International Plumbing Code, section 312.11.2, reduced pressure, double check and pressure vacuum breaker assemblies are tested when installed, right after any repair or relocation and at least once a year. Ask for a tester qualified under ASSE 5110, and in Texas a Water Supply Protection Specialist for customer service inspections. Your water utility may set its own reporting deadline.
Can any plumber install medical gas piping?
No. IPC 1202.1 sends medical gas work to NFPA 99, and installers are normally qualified under ASSE 6010. Texas law, Occupations Code 1301.356, also requires a master or journeyman license plus a medical gas piping installation endorsement. Florida includes oxygen, nitrous oxide and related medical gas systems in the plumbing contractor’s licensed scope.
Should I hire the plumbing contractor directly or through my general contractor?
On a new building or major renovation, plumbing is normally a subcontract under the general contractor, but you can still check the sub’s license number yourself. For service, repairs and annual backflow testing, hire directly on an hourly rate sheet. In Virginia, a general contractor’s CBC classification does not cover plumbing under 18VAC50-22-20.
Sources
Statutes, codes and standards
- Florida Legislature: Florida Statutes 2026, s. 489.105 Definitions (plumbing contractor, certified and registered contractor), accessed 2026-11-01.
- Florida Construction Industry Licensing Board (Fla. Admin. Code): Rule 61G4-15.003, Public Liability Insurance, accessed 2026-11-01.
- Florida DBPR: Construction Industry: license types and applications (CF and RF plumbing contractor), accessed 2026-11-01.
- Texas Legislature: Texas Occupations Code Chapter 1301, Plumbers (1301.002, 1301.356, 1301.357, 1301.3576, 1301.552), accessed 2026-11-01.
- Texas State Board of Plumbing Examiners: License types and endorsements, accessed 2026-11-01.
- California Contractors State License Board: C-36 Plumbing Contractor classification (16 CCR 832.36), accessed 2026-11-01.
- California Legislative Information: Business and Professions Code 7071.6, contractor bond, accessed 2026-11-01.
- California Legislative Information: Business and Professions Code 7071.6.5, LLC surety bond, accessed 2026-11-01.
- North Carolina General Assembly: N.C. General Statutes 87-21, plumbing, heating and fire sprinkler license classes, accessed 2026-11-01.
- Virginia General Assembly: Code of Virginia 54.1-1100, contractor class definitions, accessed 2026-11-01.
- Virginia Board for Contractors: 18VAC50-22-20, contractor specialty definitions (PLB, CBC), accessed 2026-11-01.
- International Code Council: 2024 International Plumbing Code, Chapter 3 (312.11 backflow inspection and testing), accessed 2026-11-01.
- International Code Council: 2024 International Plumbing Code, Chapter 6 (604.8, 606.5), accessed 2026-11-01.
- International Code Council: 2024 International Plumbing Code, Chapter 7 (Table 710.1(1)), accessed 2026-11-01.
- International Code Council: 2024 International Plumbing Code, Chapter 10 (1003.3 grease interceptors), accessed 2026-11-01.
- International Code Council: 2024 International Plumbing Code, Chapter 12 (1202.1 medical gases), accessed 2026-11-01.
- ASSE International: Professional Qualifications Standards: Series 6000-2024 and Series 5000-2022e1, accessed 2026-11-01.
Rates, wages and insurance data
- City of Little Rock, Arkansas: Resolution: on-call plumbing repair contract renewal, Bid Event 3019 (September 1, 2026 agenda), accessed 2026-11-01.
- Maine Department of Transportation: Tabulation of Bids, PH20250514R1P On Call Plumbing Services, Region 1 (June 11, 2025), accessed 2026-11-01.
- Collin County, Texas: Bid tabulation 2026-296 Plumbing Services and Repairs (June 16, 2026), accessed 2026-11-01.
- Town of Greenwich, Connecticut: Bid tabulation RFB 7709 Heating, Cooling and Plumbing Services (June 29, 2022), accessed 2026-11-01.
- U.S. Bureau of Labor Statistics: Occupational Employment and Wage Statistics, May 2025 national file (47-2152), accessed 2026-11-01.
- U.S. Department of Labor via SAM.gov: General Decision CA20260018, modification 8 (September 17, 2026), San Francisco County, accessed 2026-11-01.
- U.S. Department of Labor via SAM.gov: General Decision FL20260215, modification 1 (May 18, 2026), Miami-Dade County, accessed 2026-11-01.
- Oregon Department of Consumer and Business Services: Oregon Workers’ Compensation Premium Rate Ranking, Calendar Year 2024, accessed 2026-10-06 (via our workers’ comp report).
- Acquisition.gov (GSA): FAR 28.102-1, General (bond requirements), accessed 2026-10-18.
