Skip to content

Concrete Slab Cost Per Square Foot: Commercial Prices From Public Bids

Freshly finished concrete floor slab with saw-cut joints inside an unfinished warehouse shell

Concrete slab cost per square foot for commercial slab-on-grade work runs about $10 to $16 installed as of 2026, based on public bid prices escalated with BLS data; small or reinforced pads ran $20 to $28.

Key takeaways

How much does a concrete slab cost per square foot in 2026?

For commercial slab-on-grade work in large quantities, public bid averages put installed concrete at $9.07 to $14.20 per sq ft in 2024. Escalated to September 2026 with the BLS producer price index for nonresidential concrete contractors (a factor of 1.104), that is about $10 to $16 per sq ft. Reinforced or small pads ran $18 to $28 or more.

The South Dakota Department of Transportation (SDDOT) publishes the average low bid for every pay item it awarded in a calendar year, with the total quantity and the number of bids. Its 2024 report, issued March 31, 2025, is the largest free record we found that prices flat concrete per square foot at several thicknesses. We escalated each 2024 price by the ratio of the September 2026 preliminary index (197.561) to the 2024 average (178.923) of BLS series PCU23811X23811X.

SDDOT pay item (2024)Quantity bidBidsAvg low bid, $/sq ftEscalated to Sep 2026, $/sq ftSource
6 in concrete sidewalk (651E0060)144,850 sq ft10$9.07$10.01SDDOT 2024, p. 28
8 in nonreinforced PCC pavement (380E0050)77,114 sq yd9$9.80 ($88.20/sq yd)$10.82SDDOT 2024
12 in nonreinforced PCC pavement (380E0130)34,905 sq yd3$10.26 ($92.32/sq yd)$11.33SDDOT 2024
4 in concrete sidewalk (651E0040)190,218 sq ft14$10.82$11.95SDDOT 2024, p. 28
6 in PCC driveway pavement (380E3020)1,037 sq yd8$11.10 ($99.94/sq yd)$12.26SDDOT 2024
8 in PCC driveway pavement (380E3040)1,962 sq yd6$14.20 ($127.80/sq yd)$15.68SDDOT 2024
6 in reinforced concrete sidewalk (651E0160)7,043 sq ft4$18.17$20.06SDDOT 2024, p. 28
SDDOT 2024 unit price report rows boxed: 4 in sidewalk $10.82, 6 in $9.07, 6 in reinforced $18.17 per sq ft
SDDOT 2024 Average Unit Price Report, page 28: average low bids of $10.82 (4-inch), $9.07 (6-inch) and $18.17 (6-inch reinforced) per sq ft. Source: dot.sd.gov, accessed November 1, 2026.

These are exterior flatwork items, so read them as the concrete, placing and finishing part of a building slab. The same report lists base course, reinforcing steel ($3.08 per lb) and joint sawing ($1.19 per ft) as separate pay items, and a building floor adds a vapor retarder, a troweled finish and flatness testing. Whole-building prices by building type are in our guide to commercial construction cost per square foot.

What do federal awards and school bids show for slabs of different sizes?

Federal contract records on USAspending.gov state the slab area in the award text, so the price per square foot can be read directly. Five 2022 to 2025 awards ran $12.25 per sq ft for a 13,868 sq ft pad up to $60.13 for 315 sq ft of 12-inch reinforced concrete. Small pads carry mobilization and minimum charges spread over few square feet.

RecordScope as filedAreaPrice$/sq ftDate and place
Army W911S725FA3588-inch pad on a dirt lot13,868 sq ft$169,933.77$12.25Sep 2025, Fort Leonard Wood, MO
Air Force FA483022F0078Concrete pad 20 x 40 ft800 sq ft$16,721$20.90Aug 2022, Georgia
Army W9124C24F0069Remove existing material, install 80 x 60 ft pad4,800 sq ft$107,625.95$22.42Sep 2024, Columbia, SC
DoD H9227625C0004Construct 40 x 40 ft pad1,600 sq ft$45,500$28.44Jul 2025, place not stated
Army W9128F25FA09212-inch, 4,000 psi reinforced pad315 sq ft$18,941$60.13Aug 2025, Pickstown, SD
MCPS IFB 9182.9, item 2New 5-inch sidewalk incl. excavation2,000 sq yd (annual est.)Median of 9 bids $72.00/sq yd$8.00Tabulation dated Mar 2023, Maryland
MCPS IFB 9182.9, item 178-inch monolithic pad, turndown to frost at 30 in100 sq yd (annual est.)Median of 9 bids $170.00/sq yd$18.89Tabulation dated Mar 2023, Maryland
Concrete slab and pad prices per sq ft in public recordsBar chart: public slab prices from $9.07 per sq ft for 6-inch SDDOT concrete to $28.44 for a 1,600 sq ft DoD pad.$ per sq ftSDDOT 6 in concrete, 144,850 sq ft (2024)9.07SDDOT 8 in pavement, 77,114 sq yd (2024)9.8SDDOT 4 in concrete, 190,218 sq ft (2024)10.8SDDOT 6 in driveway, 1,037 sq yd (2024)11.1Army 8 in pad, 13,868 sq ft, MO (2025)12.2SDDOT 8 in driveway, 1,962 sq yd (2024)14.2SDDOT 6 in reinforced, 7,043 sq ft (2024)18.2Air Force pad, 800 sq ft, GA (2022)20.9Army pad with removal, 4,800 sq ft, SC (2022.4DoD pad, 1,600 sq ft (2025)28.4
Large quantities bid at $9 to $12 per sq ft; small or reinforced pads at $18 to $28. Sources: SDDOT 2024 report and USAspending.gov awards, accessed November 1, 2026.

The Montgomery County Public Schools (MCPS) tabulation shows how wide one bid can run: the nine unit prices for the 8-inch monolithic pad ranged from $64.80 to $396.00 per square yard, a 6.1 times spread on identical scope. That spread is a reason to ask at least three bidders to price the slab as separate lines, as set out in our guide on how to compare construction bids.

How much does slab thickness change the price?

Each extra inch of slab adds 0.00309 cubic yards of concrete per sq ft, which is $0.46 to $0.54 per sq ft per inch at the $148 to $175 per cubic yard paid in 2026 public ready-mix bids. In the SDDOT bid data, 12-inch pavement averaged only $0.46 per sq ft more than 8-inch pavement, because placing and finishing cost about the same.

ThicknessCubic yards per sq ftSq ft per cubic yardConcrete at $148/cu ydConcrete at $175/cu ydRule or note
3 1/2 in0.0108092.6$1.60$1.89IBC 1907.1 minimum for floor slabs on ground
4 in0.0123581.0$1.83$2.16Joints about 8 to 12 ft (NRMCA CIP 6)
5 in0.0154364.8$2.28$2.70MCPS sidewalk item thickness
6 in0.0185254.0$2.74$3.24Joints about 12 to 15 ft (NRMCA CIP 6)
8 in0.0246940.5$3.65$4.32Army pad, Fort Leonard Wood, 2025
12 in0.0370427.0$5.48$6.48Army reinforced pad, Pickstown, 2025

Thickness itself is a structural decision: the engineer of record sizes it from rack post loads, lift truck wheel loads and the soil report, and IBC 1907.1 only sets the 3 1/2 inch floor. Rack layout, clear height and dock decisions that drive those loads are covered in our guide to warehouse construction. Ready-mix is 27 to 32 percent of the $10.01 escalated 6-inch price, so labor, equipment and overhead carry most of the cost.

What does ready-mix concrete cost per cubic yard in 2026?

Three 2026 public bids priced 4,000 psi concrete at $148 to $175 per cubic yard: $148 delivered in Ottawa County, Oklahoma (June 2026), $169 and $175 delivered within 10 miles of the plant in Tioga County, New York (January 2026), and $175 in a Montgomery County, Tennessee highway concrete bid opened June 2, 2026. Each step of 500 psi added $2 to $5.

Public bidOpened3,000 psi4,000 psiTermsSource
Ottawa County, OK, Highway Districts 1 to 3Jun 15, 2026$142 to $144$148 (both bidders)Delivered to job sites, 3 cu yd minimumBid tally 2026-2027.5
Tioga County, NY, Public WorksJan 15, 2026$165 and $171$169 and $175Delivery included within 10 miles of plant, orders over 3 cu ydNotice of award
Montgomery County, TN, Highway DepartmentJun 2, 2026$165$175Supply or placed not stated on the tabBid tabulation
BLS producer price index for ready-mixed concrete, September of each yearLine chart: the ready-mix concrete price index rose from 262.1 in September 2017 to 395.319 in September 2026, flattening after 2024.200250300350400450index2017201820192020202120222023202420252026
Ready-mix prices rose 30.9 percent from September 2021 to September 2026 but only 2.3 percent in the last 12 months. Source: BLS PPI WPU1333, accessed November 1, 2026.

The BLS ready-mix index (WPU1333) rose from 302.026 in September 2021 to 395.319 in September 2026 (preliminary), up 30.9 percent, but only 2.3 percent in the last 12 months. The concrete contractor index rose 5.7 percent over the same 12 months, so labor and overhead now drive slab escalation. Index trends for other building materials sit in our commercial construction price index.

Rebar, wire mesh or fibers: what does reinforcement add per square foot?

Reinforcement roughly doubled the bid price per sq ft in South Dakota: 6-inch reinforced sidewalk averaged $18.17 against $9.07 plain in 2024, though on 7,043 sq ft rather than 144,850. For a bar-reinforced slab, multiply the pounds of steel per sq ft on the structural drawings by the bid price per pound, $3.08 as the SDDOT 2024 average low bid.

OptionWhat it doesRule from the primary sourcePrice evidenceSource
Grade 60 rebarCarries structural load and holds cracks tightSized by the engineer; fibers may not replace it$3.08/lb avg low bid (2,015,088 lb, 45 contracts, 2024); MCPS median $2,200/ton installed (2023)SDDOT 2024; MCPS 9182.9
Welded wire meshKeeps cracks and joints from openingMesh will not prevent cracking; cut alternate wires or stop mesh at contraction jointsNo separate public unit price foundNRMCA CIP 6
Micro-synthetic fibersReduces plastic shrinkage cracking1 to 2 lb per cubic yard needs no mix changeQuote per lb from the ready-mix supplierNRMCA CIP 24
Macro-synthetic fibersNonstructural shrinkage and temperature reinforcementAround 5 lb per cubic yard; not for thinner slabs or wider joint spacingAbout 0.093 lb per sq ft of 6-inch slab (5 x 0.01852)NRMCA CIP 24
Plain concreteRelies on joints to control cracksJoints at 24 to 36 times slab thickness$9.07/sq ft for 6-inch (SDDOT 2024)SDDOT 2024; NRMCA CIP 6

The fiber trade-off has firm limits. NRMCA CIP 24 lists eight uses where synthetic fibers should not be used, including replacing structural steel, decreasing slab thickness and increasing control joint spacing. If a bidder offers fibers to cut rebar, ask the engineer of record to confirm in writing that the slab carries no structural load.

What else is in a commercial slab price besides concrete and steel?

Four items separate a building floor from a sidewalk: a vapor retarder, a granular base, sawcut contraction joints and a flatness specification. The Unified Facilities Guide Specification (UFGS) 03 30 00, the federal concrete spec revised in August 2025, sets numbers for each, and NRMCA’s Concrete in Practice sheets restate ACI 302.1R guidance on vapor retarders and joints in plain language.

ItemRuleSourceHow to see it in a bid
Vapor retarder (code minimum)6-mil polyethylene, laps of at least 6 in, unless an exception appliesIBC 1907.1Ask for mil thickness and ASTM E1745 class on the line
Vapor retarder (spec practice)ASTM E1745 Class A, B or C, at least 10 mil, max 0.04 perms; a vapor barrier is 15 mil, max 0.01 permsUFGS 03 30 00, 2.4.6Separate square-foot line
Retarder placementACI Committee 302 recommends concrete directly on the retarder under moisture-sensitive flooring; seams lapped 6 in and tapedNRMCA CIP 29Check the detail on the drawings
Granular baseAt least 4 in of compactable fill; 6 to 8 in of coarse stone where a capillary break is neededNRMCA CIP 29Tons or cubic yards of base, plus subgrade compaction
Contraction jointsSpacing 24 to 36 times thickness, limited to 15 ft; groove at least 1/4 of depth; saw 4 to 12 hours after finishingNRMCA CIP 6Linear feet of sawcut ($1.19/ft, SDDOT 2024)
Flatness and levelnessConventional FF20/FL15; industrial FF30/FL20; FL 25 or more under fitted partitions; ASTM E1155 test within 24 hours of final trowelingUFGS 03 30 00, 3.10.2Testing line and the remedy for failing areas
Curing under moisture-sensitive floors3 days under plastic sheeting, no more than 7 days of moist cureNRMCA CIP 29Curing method named in the bid

How much do sawcut joints add per square foot?

A square joint grid adds 2 linear feet of sawcut per grid width, divided by the panel area. On a 15 ft grid that is 0.133 linear ft per sq ft, or $0.16 per sq ft at the SDDOT 2024 average of $1.19 per ft. A 4-inch slab on a 10 ft grid needs 0.2 linear ft, or $0.24 per sq ft.

Flatness is the line most likely to change a warehouse number. UFGS 03 30 00 notes that FF/FL 20/15 equals about 5/16 inch in 10 ft and tells designers to pick F-numbers high enough for the use but not so high that they add undue cost. In tilt-up buildings the slab is also the casting bed for the wall panels; our guide to tilt-up construction covers that sequence.

What does a 50,000 sq ft warehouse slab or a 12,000 sq ft retail slab cost?

Using the escalated SDDOT averages as the installed base and adding sourced unit prices, a 50,000 sq ft, 6-inch warehouse slab with 1.0 lb of rebar per sq ft works out to $13.25 per sq ft, about $662,500. A 12,000 sq ft, 4-inch plain retail slab works out to $12.19 per sq ft, about $146,280, before vapor retarder, base and testing lines.

Warehouse line (50,000 sq ft, 6 in)InputArithmetic$/sq ftTotal
Concrete volume (for reference)0.01852 cu yd per sq ft50,000 x 0.01852Included below926 cu yd
Ready-mix share (for reference)$148 to $175 per cu yd (2026 bids)926 x $148 to $175$2.74 to $3.24$137,048 to $162,050
Installed 6 in concrete$9.07 (SDDOT 2024) x 1.10450,000 x $10.01$10.01$500,500
Rebar1.0 lb per sq ft (example input; read yours from the drawings) at $3.08/lb50,000 x 1.0 x $3.08$3.08$154,000
Sawcut joints15 ft grid, 0.133 ft per sq ft at $1.19/ft50,000 x 0.133 x $1.19$0.16$8,000
Subtotal$13.25$662,500
Vapor retarder, base, FF/FL testing10 mil ASTM E1745; 4 in base; industrial FF30/FL20Priced by biddersSeparate linesAsk for each
Warehouse slab worked example: cost per sq ft by lineBar chart: warehouse slab lines of $10.01 for installed concrete, $3.08 for rebar and $0.16 for sawcut joints per sq ft.$ per sq ftInstalled 6 in concrete (SDDOT 2024 x 1.1010.0Rebar at 1.0 lb per sq ft x $3.083.08Sawcut joints, 15 ft grid0.16
In the worked example, placed concrete is 76 percent of the $13.25 per sq ft subtotal. CB&C arithmetic from SDDOT 2024 prices and BLS PCU23811X23811X, accessed November 1, 2026.
Retail line (12,000 sq ft, 4 in)InputArithmetic$/sq ftTotal
Concrete volume (for reference)0.01235 cu yd per sq ft12,000 x 0.01235Included below148 cu yd
Installed 4 in concrete$10.82 (SDDOT 2024) x 1.10412,000 x $11.95$11.95$143,400
Sawcut joints10 ft grid, 0.2 ft per sq ft at $1.19/ft12,000 x 0.2 x $1.19$0.24$2,880
Subtotal$12.19$146,280
Vapor retarder directly under slabMoisture-sensitive flooring (NRMCA CIP 29)Priced by biddersSeparate lineAsk for it
Cross-checkMCPS new 5 in sidewalk median $8.00 (2023) x 1.106 (PCU23811X, Mar 2023 to Sep 2026)$8.85$106,200 at 12,000 sq ft

The 4-inch SDDOT item averaged more per sq ft than the 6-inch item in 2024, and the report does not say why; both are averages across different projects, so the MCPS cross-check shows a lower bound for the retail slab. Shell and suite scope for a retail center is set out in our guide to retail construction.

How does a commercial slab compare with a residential slab?

Homeowner cost guides that rank for this keyword quote $4 to $8 per sq ft without naming a source. Public bid records for commercial and public flatwork run higher: $9.07 to $10.82 per sq ft for plain 4-inch and 6-inch work in South Dakota in 2024, and $8.00 at the median for new 5-inch sidewalk in a 2023 Maryland school district bid.

What some guides say (residential, labelled contrast)What the primary record saysWhat to do
Typical slab $4 to $8 per sq ft (homeowner guide updated March 2026, no source named)SDDOT 2024 average low bids: $10.82 for 4-inch, $9.07 for 6-inch concrete per sq ftTreat $4 to $8 as a residential figure, not a commercial budget
A 2-inch slab listed at $5 per sq ft (same guide)IBC 1907.1: floor slabs on ground at least 3 1/2 in thickDo not price a building floor below 3 1/2 in
Reinforced slab $9.29 to $10.04 per sq ft (guide updated December 2024)SDDOT 2024: 6-inch reinforced sidewalk $18.17 per sq ft (7,043 sq ft, 4 bids)Budget reinforcement from the drawings, not a flat adder
Vapor barrier adds $0.50 per sq ft (homeowner guide, 2026)No public unit price found; UFGS 03 30 00 calls for 10 or 15 mil ASTM E1745 material, not the 6-mil code minimumAsk each bidder to price the specified retarder as its own line

Which slab spec fits your building?

Three questions set most of the slab spec: whether moisture-sensitive flooring or goods sit on it, whether lift trucks, racks or fitted partitions need a flat floor, and whether the slab carries structural loads. Each answer maps to a rule in IBC 1907.1, UFGS 03 30 00 or the NRMCA Concrete in Practice sheets, and to a bid line you can price.

Commercial slab spec decision flowchart Three yes or no questions set the vapor retarder, flatness and reinforcement for a commercial slab on ground, then the joint rule. Interior concrete floor slab on ground Moisture-sensitive flooring or goods on the slab? Retarder directly under slab: ASTM E1745, 10 mil min (NRMCA CIP 29, UFGS 03 30 00) IBC 1907.1: 6-mil retarder unless an exception applies Yes No Lift trucks, racking or fitted partitions? Specify FF/FL: industrial 30/20 or higher; FL 25+ for fitted partitions (UFGS 03 30 00) Conventional FF20/FL15 (UFGS 03 30 00) Yes No Slab carries structural loads (rack posts, equipment)? Rebar per engineer’s drawings; fibers cannot replace it (NRMCA CIP 24) Plain, or macro fibers about 5 lb per CY (CIP 24) Yes No Every slab: contraction joints at 24 to 36 times thickness, max 15 ft; saw 4 to 12 hours after finishing, groove at least 1/4 of thickness (NRMCA CIP 6) Compiled by CB&C from IBC 1907.1, UFGS 03 30 00 and NRMCA CIP 6, 24, 29 (accessed November 1, 2026)
Slab spec decision path compiled by CB&C from IBC 1907.1, UFGS 03 30 00 and NRMCA CIP 6, 24 and 29 (accessed November 1, 2026).
IfThen specifyThresholdSource
Moisture-sensitive flooring or goods on the slabRetarder directly under slab: ASTM E1745, 10 mil min0.1 perms or less (CIP 29); 0.04 perms (UFGS)NRMCA CIP 29, UFGS 03 30 00
No moisture-sensitive useIBC 1907.1: 6-mil retarder unless an exception appliesException where moisture from below will not harm the occupancyIBC 1907.1
Lift trucks, racking or fitted partitionsSpecify FF/FL: industrial 30/20 or higher; FL 25+ for fitted partitionsTested by ASTM E1155 within 24 hoursUFGS 03 30 00
Ordinary floorConventional FF20/FL15About 5/16 in in 10 ftUFGS 03 30 00
Slab carries structural loads (rack posts, equipment)Rebar per engineer’s drawings; fibers cannot replace itPrice at lb per sq ft x $/lbNRMCA CIP 24
Shrinkage control onlyPlain, or macro fibers about 5 lb per CYJoint spacing unchangedNRMCA CIP 24
Every slabContraction joints at 24 to 36 times thickness, max 15 ftSaw 4 to 12 hours after finishing; groove at least 1/4 of thicknessNRMCA CIP 6

Metal building packages leave the floor out of their price, as our guide to the pre-engineered metal building explains, and our steel building prices guide sets slab-included federal awards, such as a 10,023 sq ft insulated building in Texas, beside slab-excluded ones. If one firm will pour the slab and erect the shell, compare bids from metal building contractors on the same slab lines.

Slab thickness, base and vapor retarder usually follow the soil findings explained in our geotechnical report guide.

How many days a slab must cure before traffic, loads and flooring is set out in our guide to concrete curing time.

Minimum strengths by exposure class and how cylinders are accepted are set out in our guide to concrete psi.

How we compiled this

We read 17 primary documents in November 2026: the SDDOT 2024 Bid Item Price Report, the MCPS IFB 9182.9 tabulation, three 2026 county ready-mix bids, five USAspending.gov awards that state slab area, two BLS producer price series, IBC Section 1907.1, UFGS 03 30 00 and NRMCA CIP 6, 24 and 29. We did not test slabs, visit sites or survey contractors, and every escalated figure shows its index ratio.

Frequently asked questions

How much does a 6-inch concrete slab cost per square foot?

South Dakota DOT’s 2024 bids averaged $9.07 per sq ft for 6-inch concrete across 144,850 sq ft and 10 bids, about $10.01 after escalating to September 2026 with the BLS concrete contractor index. Add reinforcement from the drawings ($3.08 per lb of rebar in the same report), sawcut joints, base and a vapor retarder for a building floor.

How much does a 40×60 concrete slab cost?

A 40 by 60 ft slab is 2,400 sq ft. At the escalated SDDOT 6-inch average of $10.01 per sq ft it comes to about $24,000 for concrete placed and finished. Small federal pads of 800 to 1,600 sq ft cost $20.90 to $28.44 per sq ft, or $50,000 to $68,000, because small jobs carry mobilization and minimum charges.

How many square feet does a cubic yard of concrete cover?

One cubic yard is 27 cubic feet, so it covers 81 sq ft at 4 inches thick, 64.8 sq ft at 5 inches, 54 sq ft at 6 inches and 40.5 sq ft at 8 inches. At the $148 to $175 per cubic yard paid in 2026 county ready-mix bids, a 6-inch slab carries $2.74 to $3.24 of concrete per sq ft.

Is a vapor barrier required under a commercial concrete slab?

IBC Section 1907.1 requires a 6-mil polyethylene vapor retarder with 6-inch laps under floor slabs on ground, with exceptions such as buildings where moisture from below will not harm the occupancy. The federal UFGS 03 30 00 spec calls for at least 10 mil under ASTM E1745, and NRMCA CIP 29 recommends one under every interior slab. This is general information, not code advice for your project.

Can fibers replace rebar in a slab on grade?

Not where the slab carries structural load. NRMCA CIP 24 says synthetic fibers should not replace moment-resisting or structural steel, reduce slab thickness or increase control joint spacing. Macro-synthetic fibers at around 5 lb per cubic yard can serve as nonstructural shrinkage and temperature reinforcement, which the engineer of record should confirm in writing.

Why do small concrete slabs cost more per square foot?

Mobilization, pump or truck minimums and forming are spread over fewer square feet. In federal awards, a 13,868 sq ft Army pad cost $12.25 per sq ft in 2025, while a 1,600 sq ft pad cost $28.44 and a 315 sq ft reinforced pad cost $60.13. Ready-mix bids in 2026 also set 3 cubic yard minimums.

Sources

Last reviewed November 2026 by the CB&C Editorial Team. See our editorial standards.

← Back to all articles