Concrete slab cost per square foot for commercial slab-on-grade work runs about $10 to $16 installed as of 2026, based on public bid prices escalated with BLS data; small or reinforced pads ran $20 to $28.
Key takeaways
- The South Dakota DOT 2024 Bid Item Price Report shows an average low bid of $9.07 per sq ft for 6-inch concrete (144,850 sq ft, 10 bids) and $88.20 per square yard, or $9.80 per sq ft, for 8-inch concrete pavement (77,114 square yards).
- Quantity moved price more than thickness: the same report priced 8-inch concrete driveway at $14.20 per sq ft on 1,962 square yards, 45 percent above 8-inch pavement bid in quantities about 39 times larger.
- Delivered 4,000 psi ready-mix cost $148 per cubic yard in an Ottawa County, Oklahoma bid opened June 15, 2026 and $169 to $175 in a Tioga County, New York bid opened January 15, 2026: $2.74 to $3.24 of concrete per sq ft of 6-inch slab.
- BLS producer prices for ready-mixed concrete (WPU1333) rose 2.3 percent in the 12 months to September 2026, while the index for nonresidential concrete contractors (PCU23811X23811X) rose 5.7 percent, so installed slab prices are climbing faster than the concrete itself.
- IBC Section 1907.1 sets a 3 1/2 inch minimum for floor slabs on ground and a 6-mil vapor retarder; the federal guide spec UFGS 03 30 00 calls for at least 10 mil under ASTM E1745.
- Size premium on federal awards: an 8-inch, 13,868 sq ft Army pad in Missouri cost $12.25 per sq ft in 2025, while a 40 by 40 ft Defense Department pad cost $28.44.
How much does a concrete slab cost per square foot in 2026?
For commercial slab-on-grade work in large quantities, public bid averages put installed concrete at $9.07 to $14.20 per sq ft in 2024. Escalated to September 2026 with the BLS producer price index for nonresidential concrete contractors (a factor of 1.104), that is about $10 to $16 per sq ft. Reinforced or small pads ran $18 to $28 or more.
The South Dakota Department of Transportation (SDDOT) publishes the average low bid for every pay item it awarded in a calendar year, with the total quantity and the number of bids. Its 2024 report, issued March 31, 2025, is the largest free record we found that prices flat concrete per square foot at several thicknesses. We escalated each 2024 price by the ratio of the September 2026 preliminary index (197.561) to the 2024 average (178.923) of BLS series PCU23811X23811X.
| SDDOT pay item (2024) | Quantity bid | Bids | Avg low bid, $/sq ft | Escalated to Sep 2026, $/sq ft | Source |
|---|---|---|---|---|---|
| 6 in concrete sidewalk (651E0060) | 144,850 sq ft | 10 | $9.07 | $10.01 | SDDOT 2024, p. 28 |
| 8 in nonreinforced PCC pavement (380E0050) | 77,114 sq yd | 9 | $9.80 ($88.20/sq yd) | $10.82 | SDDOT 2024 |
| 12 in nonreinforced PCC pavement (380E0130) | 34,905 sq yd | 3 | $10.26 ($92.32/sq yd) | $11.33 | SDDOT 2024 |
| 4 in concrete sidewalk (651E0040) | 190,218 sq ft | 14 | $10.82 | $11.95 | SDDOT 2024, p. 28 |
| 6 in PCC driveway pavement (380E3020) | 1,037 sq yd | 8 | $11.10 ($99.94/sq yd) | $12.26 | SDDOT 2024 |
| 8 in PCC driveway pavement (380E3040) | 1,962 sq yd | 6 | $14.20 ($127.80/sq yd) | $15.68 | SDDOT 2024 |
| 6 in reinforced concrete sidewalk (651E0160) | 7,043 sq ft | 4 | $18.17 | $20.06 | SDDOT 2024, p. 28 |

These are exterior flatwork items, so read them as the concrete, placing and finishing part of a building slab. The same report lists base course, reinforcing steel ($3.08 per lb) and joint sawing ($1.19 per ft) as separate pay items, and a building floor adds a vapor retarder, a troweled finish and flatness testing. Whole-building prices by building type are in our guide to commercial construction cost per square foot.
What do federal awards and school bids show for slabs of different sizes?
Federal contract records on USAspending.gov state the slab area in the award text, so the price per square foot can be read directly. Five 2022 to 2025 awards ran $12.25 per sq ft for a 13,868 sq ft pad up to $60.13 for 315 sq ft of 12-inch reinforced concrete. Small pads carry mobilization and minimum charges spread over few square feet.
| Record | Scope as filed | Area | Price | $/sq ft | Date and place |
|---|---|---|---|---|---|
| Army W911S725FA358 | 8-inch pad on a dirt lot | 13,868 sq ft | $169,933.77 | $12.25 | Sep 2025, Fort Leonard Wood, MO |
| Air Force FA483022F0078 | Concrete pad 20 x 40 ft | 800 sq ft | $16,721 | $20.90 | Aug 2022, Georgia |
| Army W9124C24F0069 | Remove existing material, install 80 x 60 ft pad | 4,800 sq ft | $107,625.95 | $22.42 | Sep 2024, Columbia, SC |
| DoD H9227625C0004 | Construct 40 x 40 ft pad | 1,600 sq ft | $45,500 | $28.44 | Jul 2025, place not stated |
| Army W9128F25FA092 | 12-inch, 4,000 psi reinforced pad | 315 sq ft | $18,941 | $60.13 | Aug 2025, Pickstown, SD |
| MCPS IFB 9182.9, item 2 | New 5-inch sidewalk incl. excavation | 2,000 sq yd (annual est.) | Median of 9 bids $72.00/sq yd | $8.00 | Tabulation dated Mar 2023, Maryland |
| MCPS IFB 9182.9, item 17 | 8-inch monolithic pad, turndown to frost at 30 in | 100 sq yd (annual est.) | Median of 9 bids $170.00/sq yd | $18.89 | Tabulation dated Mar 2023, Maryland |
The Montgomery County Public Schools (MCPS) tabulation shows how wide one bid can run: the nine unit prices for the 8-inch monolithic pad ranged from $64.80 to $396.00 per square yard, a 6.1 times spread on identical scope. That spread is a reason to ask at least three bidders to price the slab as separate lines, as set out in our guide on how to compare construction bids.
How much does slab thickness change the price?
Each extra inch of slab adds 0.00309 cubic yards of concrete per sq ft, which is $0.46 to $0.54 per sq ft per inch at the $148 to $175 per cubic yard paid in 2026 public ready-mix bids. In the SDDOT bid data, 12-inch pavement averaged only $0.46 per sq ft more than 8-inch pavement, because placing and finishing cost about the same.
| Thickness | Cubic yards per sq ft | Sq ft per cubic yard | Concrete at $148/cu yd | Concrete at $175/cu yd | Rule or note |
|---|---|---|---|---|---|
| 3 1/2 in | 0.01080 | 92.6 | $1.60 | $1.89 | IBC 1907.1 minimum for floor slabs on ground |
| 4 in | 0.01235 | 81.0 | $1.83 | $2.16 | Joints about 8 to 12 ft (NRMCA CIP 6) |
| 5 in | 0.01543 | 64.8 | $2.28 | $2.70 | MCPS sidewalk item thickness |
| 6 in | 0.01852 | 54.0 | $2.74 | $3.24 | Joints about 12 to 15 ft (NRMCA CIP 6) |
| 8 in | 0.02469 | 40.5 | $3.65 | $4.32 | Army pad, Fort Leonard Wood, 2025 |
| 12 in | 0.03704 | 27.0 | $5.48 | $6.48 | Army reinforced pad, Pickstown, 2025 |
Thickness itself is a structural decision: the engineer of record sizes it from rack post loads, lift truck wheel loads and the soil report, and IBC 1907.1 only sets the 3 1/2 inch floor. Rack layout, clear height and dock decisions that drive those loads are covered in our guide to warehouse construction. Ready-mix is 27 to 32 percent of the $10.01 escalated 6-inch price, so labor, equipment and overhead carry most of the cost.
What does ready-mix concrete cost per cubic yard in 2026?
Three 2026 public bids priced 4,000 psi concrete at $148 to $175 per cubic yard: $148 delivered in Ottawa County, Oklahoma (June 2026), $169 and $175 delivered within 10 miles of the plant in Tioga County, New York (January 2026), and $175 in a Montgomery County, Tennessee highway concrete bid opened June 2, 2026. Each step of 500 psi added $2 to $5.
| Public bid | Opened | 3,000 psi | 4,000 psi | Terms | Source |
|---|---|---|---|---|---|
| Ottawa County, OK, Highway Districts 1 to 3 | Jun 15, 2026 | $142 to $144 | $148 (both bidders) | Delivered to job sites, 3 cu yd minimum | Bid tally 2026-2027.5 |
| Tioga County, NY, Public Works | Jan 15, 2026 | $165 and $171 | $169 and $175 | Delivery included within 10 miles of plant, orders over 3 cu yd | Notice of award |
| Montgomery County, TN, Highway Department | Jun 2, 2026 | $165 | $175 | Supply or placed not stated on the tab | Bid tabulation |
The BLS ready-mix index (WPU1333) rose from 302.026 in September 2021 to 395.319 in September 2026 (preliminary), up 30.9 percent, but only 2.3 percent in the last 12 months. The concrete contractor index rose 5.7 percent over the same 12 months, so labor and overhead now drive slab escalation. Index trends for other building materials sit in our commercial construction price index.
Rebar, wire mesh or fibers: what does reinforcement add per square foot?
Reinforcement roughly doubled the bid price per sq ft in South Dakota: 6-inch reinforced sidewalk averaged $18.17 against $9.07 plain in 2024, though on 7,043 sq ft rather than 144,850. For a bar-reinforced slab, multiply the pounds of steel per sq ft on the structural drawings by the bid price per pound, $3.08 as the SDDOT 2024 average low bid.
| Option | What it does | Rule from the primary source | Price evidence | Source |
|---|---|---|---|---|
| Grade 60 rebar | Carries structural load and holds cracks tight | Sized by the engineer; fibers may not replace it | $3.08/lb avg low bid (2,015,088 lb, 45 contracts, 2024); MCPS median $2,200/ton installed (2023) | SDDOT 2024; MCPS 9182.9 |
| Welded wire mesh | Keeps cracks and joints from opening | Mesh will not prevent cracking; cut alternate wires or stop mesh at contraction joints | No separate public unit price found | NRMCA CIP 6 |
| Micro-synthetic fibers | Reduces plastic shrinkage cracking | 1 to 2 lb per cubic yard needs no mix change | Quote per lb from the ready-mix supplier | NRMCA CIP 24 |
| Macro-synthetic fibers | Nonstructural shrinkage and temperature reinforcement | Around 5 lb per cubic yard; not for thinner slabs or wider joint spacing | About 0.093 lb per sq ft of 6-inch slab (5 x 0.01852) | NRMCA CIP 24 |
| Plain concrete | Relies on joints to control cracks | Joints at 24 to 36 times slab thickness | $9.07/sq ft for 6-inch (SDDOT 2024) | SDDOT 2024; NRMCA CIP 6 |
The fiber trade-off has firm limits. NRMCA CIP 24 lists eight uses where synthetic fibers should not be used, including replacing structural steel, decreasing slab thickness and increasing control joint spacing. If a bidder offers fibers to cut rebar, ask the engineer of record to confirm in writing that the slab carries no structural load.
What else is in a commercial slab price besides concrete and steel?
Four items separate a building floor from a sidewalk: a vapor retarder, a granular base, sawcut contraction joints and a flatness specification. The Unified Facilities Guide Specification (UFGS) 03 30 00, the federal concrete spec revised in August 2025, sets numbers for each, and NRMCA’s Concrete in Practice sheets restate ACI 302.1R guidance on vapor retarders and joints in plain language.
| Item | Rule | Source | How to see it in a bid |
|---|---|---|---|
| Vapor retarder (code minimum) | 6-mil polyethylene, laps of at least 6 in, unless an exception applies | IBC 1907.1 | Ask for mil thickness and ASTM E1745 class on the line |
| Vapor retarder (spec practice) | ASTM E1745 Class A, B or C, at least 10 mil, max 0.04 perms; a vapor barrier is 15 mil, max 0.01 perms | UFGS 03 30 00, 2.4.6 | Separate square-foot line |
| Retarder placement | ACI Committee 302 recommends concrete directly on the retarder under moisture-sensitive flooring; seams lapped 6 in and taped | NRMCA CIP 29 | Check the detail on the drawings |
| Granular base | At least 4 in of compactable fill; 6 to 8 in of coarse stone where a capillary break is needed | NRMCA CIP 29 | Tons or cubic yards of base, plus subgrade compaction |
| Contraction joints | Spacing 24 to 36 times thickness, limited to 15 ft; groove at least 1/4 of depth; saw 4 to 12 hours after finishing | NRMCA CIP 6 | Linear feet of sawcut ($1.19/ft, SDDOT 2024) |
| Flatness and levelness | Conventional FF20/FL15; industrial FF30/FL20; FL 25 or more under fitted partitions; ASTM E1155 test within 24 hours of final troweling | UFGS 03 30 00, 3.10.2 | Testing line and the remedy for failing areas |
| Curing under moisture-sensitive floors | 3 days under plastic sheeting, no more than 7 days of moist cure | NRMCA CIP 29 | Curing method named in the bid |
How much do sawcut joints add per square foot?
A square joint grid adds 2 linear feet of sawcut per grid width, divided by the panel area. On a 15 ft grid that is 0.133 linear ft per sq ft, or $0.16 per sq ft at the SDDOT 2024 average of $1.19 per ft. A 4-inch slab on a 10 ft grid needs 0.2 linear ft, or $0.24 per sq ft.
Flatness is the line most likely to change a warehouse number. UFGS 03 30 00 notes that FF/FL 20/15 equals about 5/16 inch in 10 ft and tells designers to pick F-numbers high enough for the use but not so high that they add undue cost. In tilt-up buildings the slab is also the casting bed for the wall panels; our guide to tilt-up construction covers that sequence.
What does a 50,000 sq ft warehouse slab or a 12,000 sq ft retail slab cost?
Using the escalated SDDOT averages as the installed base and adding sourced unit prices, a 50,000 sq ft, 6-inch warehouse slab with 1.0 lb of rebar per sq ft works out to $13.25 per sq ft, about $662,500. A 12,000 sq ft, 4-inch plain retail slab works out to $12.19 per sq ft, about $146,280, before vapor retarder, base and testing lines.
| Warehouse line (50,000 sq ft, 6 in) | Input | Arithmetic | $/sq ft | Total |
|---|---|---|---|---|
| Concrete volume (for reference) | 0.01852 cu yd per sq ft | 50,000 x 0.01852 | Included below | 926 cu yd |
| Ready-mix share (for reference) | $148 to $175 per cu yd (2026 bids) | 926 x $148 to $175 | $2.74 to $3.24 | $137,048 to $162,050 |
| Installed 6 in concrete | $9.07 (SDDOT 2024) x 1.104 | 50,000 x $10.01 | $10.01 | $500,500 |
| Rebar | 1.0 lb per sq ft (example input; read yours from the drawings) at $3.08/lb | 50,000 x 1.0 x $3.08 | $3.08 | $154,000 |
| Sawcut joints | 15 ft grid, 0.133 ft per sq ft at $1.19/ft | 50,000 x 0.133 x $1.19 | $0.16 | $8,000 |
| Subtotal | $13.25 | $662,500 | ||
| Vapor retarder, base, FF/FL testing | 10 mil ASTM E1745; 4 in base; industrial FF30/FL20 | Priced by bidders | Separate lines | Ask for each |
| Retail line (12,000 sq ft, 4 in) | Input | Arithmetic | $/sq ft | Total |
|---|---|---|---|---|
| Concrete volume (for reference) | 0.01235 cu yd per sq ft | 12,000 x 0.01235 | Included below | 148 cu yd |
| Installed 4 in concrete | $10.82 (SDDOT 2024) x 1.104 | 12,000 x $11.95 | $11.95 | $143,400 |
| Sawcut joints | 10 ft grid, 0.2 ft per sq ft at $1.19/ft | 12,000 x 0.2 x $1.19 | $0.24 | $2,880 |
| Subtotal | $12.19 | $146,280 | ||
| Vapor retarder directly under slab | Moisture-sensitive flooring (NRMCA CIP 29) | Priced by bidders | Separate line | Ask for it |
| Cross-check | MCPS new 5 in sidewalk median $8.00 (2023) x 1.106 (PCU23811X, Mar 2023 to Sep 2026) | $8.85 | $106,200 at 12,000 sq ft |
The 4-inch SDDOT item averaged more per sq ft than the 6-inch item in 2024, and the report does not say why; both are averages across different projects, so the MCPS cross-check shows a lower bound for the retail slab. Shell and suite scope for a retail center is set out in our guide to retail construction.
How does a commercial slab compare with a residential slab?
Homeowner cost guides that rank for this keyword quote $4 to $8 per sq ft without naming a source. Public bid records for commercial and public flatwork run higher: $9.07 to $10.82 per sq ft for plain 4-inch and 6-inch work in South Dakota in 2024, and $8.00 at the median for new 5-inch sidewalk in a 2023 Maryland school district bid.
| What some guides say (residential, labelled contrast) | What the primary record says | What to do |
|---|---|---|
| Typical slab $4 to $8 per sq ft (homeowner guide updated March 2026, no source named) | SDDOT 2024 average low bids: $10.82 for 4-inch, $9.07 for 6-inch concrete per sq ft | Treat $4 to $8 as a residential figure, not a commercial budget |
| A 2-inch slab listed at $5 per sq ft (same guide) | IBC 1907.1: floor slabs on ground at least 3 1/2 in thick | Do not price a building floor below 3 1/2 in |
| Reinforced slab $9.29 to $10.04 per sq ft (guide updated December 2024) | SDDOT 2024: 6-inch reinforced sidewalk $18.17 per sq ft (7,043 sq ft, 4 bids) | Budget reinforcement from the drawings, not a flat adder |
| Vapor barrier adds $0.50 per sq ft (homeowner guide, 2026) | No public unit price found; UFGS 03 30 00 calls for 10 or 15 mil ASTM E1745 material, not the 6-mil code minimum | Ask each bidder to price the specified retarder as its own line |
Which slab spec fits your building?
Three questions set most of the slab spec: whether moisture-sensitive flooring or goods sit on it, whether lift trucks, racks or fitted partitions need a flat floor, and whether the slab carries structural loads. Each answer maps to a rule in IBC 1907.1, UFGS 03 30 00 or the NRMCA Concrete in Practice sheets, and to a bid line you can price.
| If | Then specify | Threshold | Source |
|---|---|---|---|
| Moisture-sensitive flooring or goods on the slab | Retarder directly under slab: ASTM E1745, 10 mil min | 0.1 perms or less (CIP 29); 0.04 perms (UFGS) | NRMCA CIP 29, UFGS 03 30 00 |
| No moisture-sensitive use | IBC 1907.1: 6-mil retarder unless an exception applies | Exception where moisture from below will not harm the occupancy | IBC 1907.1 |
| Lift trucks, racking or fitted partitions | Specify FF/FL: industrial 30/20 or higher; FL 25+ for fitted partitions | Tested by ASTM E1155 within 24 hours | UFGS 03 30 00 |
| Ordinary floor | Conventional FF20/FL15 | About 5/16 in in 10 ft | UFGS 03 30 00 |
| Slab carries structural loads (rack posts, equipment) | Rebar per engineer’s drawings; fibers cannot replace it | Price at lb per sq ft x $/lb | NRMCA CIP 24 |
| Shrinkage control only | Plain, or macro fibers about 5 lb per CY | Joint spacing unchanged | NRMCA CIP 24 |
| Every slab | Contraction joints at 24 to 36 times thickness, max 15 ft | Saw 4 to 12 hours after finishing; groove at least 1/4 of thickness | NRMCA CIP 6 |
Metal building packages leave the floor out of their price, as our guide to the pre-engineered metal building explains, and our steel building prices guide sets slab-included federal awards, such as a 10,023 sq ft insulated building in Texas, beside slab-excluded ones. If one firm will pour the slab and erect the shell, compare bids from metal building contractors on the same slab lines.
Slab thickness, base and vapor retarder usually follow the soil findings explained in our geotechnical report guide.
How many days a slab must cure before traffic, loads and flooring is set out in our guide to concrete curing time.
Minimum strengths by exposure class and how cylinders are accepted are set out in our guide to concrete psi.
How we compiled this
We read 17 primary documents in November 2026: the SDDOT 2024 Bid Item Price Report, the MCPS IFB 9182.9 tabulation, three 2026 county ready-mix bids, five USAspending.gov awards that state slab area, two BLS producer price series, IBC Section 1907.1, UFGS 03 30 00 and NRMCA CIP 6, 24 and 29. We did not test slabs, visit sites or survey contractors, and every escalated figure shows its index ratio.
Frequently asked questions
How much does a 6-inch concrete slab cost per square foot?
South Dakota DOT’s 2024 bids averaged $9.07 per sq ft for 6-inch concrete across 144,850 sq ft and 10 bids, about $10.01 after escalating to September 2026 with the BLS concrete contractor index. Add reinforcement from the drawings ($3.08 per lb of rebar in the same report), sawcut joints, base and a vapor retarder for a building floor.
How much does a 40×60 concrete slab cost?
A 40 by 60 ft slab is 2,400 sq ft. At the escalated SDDOT 6-inch average of $10.01 per sq ft it comes to about $24,000 for concrete placed and finished. Small federal pads of 800 to 1,600 sq ft cost $20.90 to $28.44 per sq ft, or $50,000 to $68,000, because small jobs carry mobilization and minimum charges.
How many square feet does a cubic yard of concrete cover?
One cubic yard is 27 cubic feet, so it covers 81 sq ft at 4 inches thick, 64.8 sq ft at 5 inches, 54 sq ft at 6 inches and 40.5 sq ft at 8 inches. At the $148 to $175 per cubic yard paid in 2026 county ready-mix bids, a 6-inch slab carries $2.74 to $3.24 of concrete per sq ft.
Is a vapor barrier required under a commercial concrete slab?
IBC Section 1907.1 requires a 6-mil polyethylene vapor retarder with 6-inch laps under floor slabs on ground, with exceptions such as buildings where moisture from below will not harm the occupancy. The federal UFGS 03 30 00 spec calls for at least 10 mil under ASTM E1745, and NRMCA CIP 29 recommends one under every interior slab. This is general information, not code advice for your project.
Can fibers replace rebar in a slab on grade?
Not where the slab carries structural load. NRMCA CIP 24 says synthetic fibers should not replace moment-resisting or structural steel, reduce slab thickness or increase control joint spacing. Macro-synthetic fibers at around 5 lb per cubic yard can serve as nonstructural shrinkage and temperature reinforcement, which the engineer of record should confirm in writing.
Why do small concrete slabs cost more per square foot?
Mobilization, pump or truck minimums and forming are spread over fewer square feet. In federal awards, a 13,868 sq ft Army pad cost $12.25 per sq ft in 2025, while a 1,600 sq ft pad cost $28.44 and a 315 sq ft reinforced pad cost $60.13. Ready-mix bids in 2026 also set 3 cubic yard minimums.
Sources
- 2024 Bid Item Price Report (Jan to Dec 2024 lettings, issued Mar 31, 2025), South Dakota Department of Transportation. Accessed November 1, 2026.
- IFB 9182.9 Bid Tabulation (concrete sidewalk, slab and pad unit prices), Montgomery County Public Schools, Maryland. Accessed November 1, 2026.
- Bid 2026-2027.5 six-month ready-mix concrete, opened June 15, 2026, Ottawa County, Oklahoma, Highway Districts 1 to 3. Accessed November 1, 2026.
- Portland cement concrete bid tabulation and notice of award, opened January 15, 2026, Tioga County, New York, Public Works. Accessed November 1, 2026.
- Bid Tabulation: Concrete, Highway Department, opened June 2, 2026, Montgomery County, Tennessee. Accessed November 1, 2026.
- Award W911S725FA358: 8-inch concrete pad, 13,868 sq ft, USAspending.gov. Accessed November 1, 2026.
- Award W9124C24F0069: 80 x 60 ft concrete pad, USAspending.gov. Accessed November 1, 2026.
- Award FA483022F0078: 20 x 40 ft concrete pad, USAspending.gov. Accessed November 1, 2026.
- Award H9227625C0004: 40 x 40 ft concrete pad, USAspending.gov. Accessed November 1, 2026.
- Award W9128F25FA092: 315 sq ft, 12-inch reinforced pad, USAspending.gov. Accessed November 1, 2026.
- PPI: Ready-mixed concrete (WPU1333), U.S. Bureau of Labor Statistics. Accessed November 1, 2026.
- PPI: Concrete contractors, nonresidential building work (PCU23811X23811X), U.S. Bureau of Labor Statistics. Accessed November 1, 2026.
- International Building Code Section 1907.1, Minimum Slab Provisions (2021 text as adopted in Illinois), International Code Council, via UpCodes. Accessed November 1, 2026.
- UFGS 03 30 00 Cast-in-Place Concrete (Feb 2019, Change 10, Aug 2025), USACE / NAVFAC / AFCEC, via WBDG. Accessed November 1, 2026.
- CIP 6: Joints in Concrete Slabs on Grade, National Ready Mixed Concrete Association. Accessed November 1, 2026.
- CIP 24: Synthetic Fibers for Concrete, National Ready Mixed Concrete Association. Accessed November 1, 2026.
- CIP 29: Vapor Retarders Under Slabs on Grade, National Ready Mixed Concrete Association. Accessed November 1, 2026.
